Changes between Initial Version and Version 1 of nl/Installation-Recovery-Mips-Beyonwiz


Ignore:
Timestamp:
Dec 6, 2020, 11:19:52 PM (5 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • nl/Installation-Recovery-Mips-Beyonwiz

    v1 v1  
     1[[TranslatedPages]]
     2----
     3'''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     4----
     5
     6
     7manufacturer blurb.....
     8
     9
     10----
     11'''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     12----
     13'' How do I install an Beyonwiz T4 Update UBI image? ''
     14 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     15 * Extract the zip file
     16 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     17    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     18     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     19 * Turn off the Receiver and disconnect all USB devices.
     20 * Connect the USB stick with the IRD file to your Receiver
     21 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     22   then the installation begins, Only then release the button.
     23    Note: If installation does not start , use a different USB stick.
     24 * After successfully installing the receiver will reboot and the installed image should start-up
     25[[br]]
     26[#point8 Top of Page]
     27[[br]]