| | 1 | ---- |
| | 2 | '''8.061 Mips Atemio''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 3 | ---- |
| | 4 | |
| | 5 | manufacturer blurb..... |
| | 6 | |
| | 7 | |
| | 8 | |
| | 9 | |
| | 10 | |
| | 11 | ---- |
| | 12 | '''8.061 Atemio-Nemesis''' [=#point8.061] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 13 | ---- |
| | 14 | '' How do I install an Atemio 5000 Update UBI image? '' |
| | 15 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 16 | * Extract the zip file |
| | 17 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 18 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 19 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 20 | * Turn off the Receiver and disconnect all USB devices. |
| | 21 | * Connect the USB stick with the IRD file to your Receiver |
| | 22 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 23 | then the installation begins, Only then release the button. |
| | 24 | Note: If installation does not start , use a different USB stick. |
| | 25 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 26 | [[br]] |
| | 27 | [#point8 Top of Page] |
| | 28 | [[br]] |
| | 29 | ---- |
| | 30 | '''8.062 Atemio5200''' [=#point8.062] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 31 | ---- |
| | 32 | '' How do I install an Atemio 5200 Update UBI image? '' |
| | 33 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 34 | * Extract the zip file |
| | 35 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 36 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 37 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 38 | * Turn off the Receiver and disconnect all USB devices. |
| | 39 | * Connect the USB stick with the IRD file to your Receiver |
| | 40 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 41 | then the installation begins, Only then release the button. |
| | 42 | Note: If installation does not start , use a different USB stick. |
| | 43 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 44 | [[br]] |
| | 45 | [#point8 Top of Page] |
| | 46 | [[br]] |
| | 47 | ---- |
| | 48 | '''8.063 Atemio6000''' [=#point8.063] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 49 | ---- |
| | 50 | '' How do I install an Atemio 6000 Update UBI image? '' |
| | 51 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 52 | * Extract the zip file |
| | 53 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 54 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 55 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 56 | * Turn off the Receiver and disconnect all USB devices. |
| | 57 | * Connect the USB stick with the IRD file to your Receiver |
| | 58 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 59 | then the installation begins, Only then release the button. |
| | 60 | Note: If installation does not start , use a different USB stick. |
| | 61 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 62 | [[br]] |
| | 63 | [#point8 Top of Page] |
| | 64 | [[br]] |
| | 65 | ---- |
| | 66 | '''8.064 Atemio6100''' [=#point8.064] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 67 | ---- |
| | 68 | '' How do I install an Atemio 6100 Update UBI image? '' |
| | 69 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 70 | * Extract the zip file |
| | 71 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 72 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 73 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 74 | * Turn off the Receiver and disconnect all USB devices. |
| | 75 | * Connect the USB stick with the IRD file to your Receiver |
| | 76 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 77 | then the installation begins, Only then release the button. |
| | 78 | Note: If installation does not start , use a different USB stick. |
| | 79 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 80 | [[br]] |
| | 81 | [#point8 Top of Page] |
| | 82 | [[br]] |
| | 83 | ---- |
| | 84 | '''8.065 Atemio6200''' [=#point8.065] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 85 | ---- |
| | 86 | '' How do I install an Atemio 6200 Update UBI image? '' |
| | 87 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 88 | * Extract the zip file |
| | 89 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 90 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 91 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 92 | * Turn off the Receiver and disconnect all USB devices. |
| | 93 | * Connect the USB stick with the IRD file to your Receiver |
| | 94 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 95 | then the installation begins, Only then release the button. |
| | 96 | Note: If installation does not start , use a different USB stick. |
| | 97 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 98 | [[br]] |
| | 99 | [#point8 Top of Page] |
| | 100 | [[br]] |
![(please configure the [header_logo] section in trac.ini)](/openaaf/chrome/common/titannit_trac_banner.png)
