Changes between Version 1 and Version 2 of fr/Installation-Recovery-SH4-Katherin


Ignore:
Timestamp:
Jan 12, 2026, 11:57:09 AM (3 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • fr/Installation-Recovery-SH4-Katherin

    v1 v2  
     1----
     2'''8.040 Kathrein''' [=#point8.040] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     3----
     4
     5Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
     6
     7'''SH4 Fortis Contents'''
     8
     9 * [#point8.041 8.041 Kathrein Ufs910]
     10 * [#point8.042 8.042 Kathrein Ufs912]
     11 * [#point8.043 8.043 Kathrein Ufs913]
     12 * [#point8.044 8.044 Kathrein Ufs922]
     13 * [#point8.045 8.045 Kathrein Ufs960]
     14
     15'''Additional Info'''
     16
     17 * [#point8.046 8.06 Uninstallation]
     18 * [#point8.047 8.07 Update TitanNit]
     19 * [#point8.048 8.08 IRD Download Location]
     20
     21----
     22'''8.041 Kathrein Ufs910''' [=#point8.041] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     23----
     24'' How do I install a Kathrein UFS910 update image? ''
     25 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     26 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     27 * Extract the zip file
     28 * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick.
     29     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     30     " HP USB Disk Storage Format Tool" (freeware program).
     31     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     32 * Turn off the Receiver and disconnect all USB devices.
     33 * Connect the USB stick with the img file to the front USB Port
     34 * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds)
     35   until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button-
     36     Note: If installation does not start, use a different USB stick.
     37 * After successfully installing the receiver will reboot and the installed image should start-up
     38[[br]]
     39[#point8 Top of Page]
     40[[br]]
     41----
     42'''8.042 Kathrein UFS912''' [=#point8.042] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     43----
     44'' How do I install a Kathrein UFS912 update image? ''
     45 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     46 * Extract the zip file
     47 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ .
     48     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     49     " HP USB Disk Storage Format Tool" (freeware program).
     50     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     51 * Turn off the Receiver and disconnect all USB devices.
     52 * Connect the USB stick with the img file
     53 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     54   then the installation begins. Only after that message release the -TV/Radio button-
     55     Note: If installation does not start, use a different USB stick.
     56 * After successfully installing the receiver will reboot and the installed image should start-up
     57[[br]]
     58[#point8.1 Top of Page]
     59[[br]]
     60----
     61'''8.043 Kathrein UFS913''' [=#point8.043] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     62----
     63'' How do I install a Kathrein UFS913 update image? ''
     64 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     65 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     66 * Extract the zip file
     67 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
     68     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     69     " HP USB Disk Storage Format Tool" (freeware program).
     70     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     71 * Turn off the Receiver and disconnect all USB devices.
     72 * Connect the USB stick with the img file
     73 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     74   then the installation begins. Only after that message release the -TV/Radio button-
     75     Note: If installation does not start, use a different USB stick.
     76 * After successfully installing the receiver will reboot and the installed image should start-up
     77[[br]]
     78[#point8.1 Top of Page]
     79[[br]]
     80----
     81'''8.044 Kathrein UFS922''' [=#point8.044] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     82----
     83'' How do I install a Kathrein UFS922 update image? ''
     84 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     85 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     86 * Extract the zip file
     87 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ .
     88     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     89     " HP USB Disk Storage Format Tool" (freeware program).
     90     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     91 * Turn off the Receiver and disconnect all USB devices.
     92 * Connect the USB stick with the img file
     93 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     94   then the installation begins. Only after that message release the -TV/Radio button-
     95     Note: If installation does not start, use a different USB stick.
     96 * After successfully installing the receiver will reboot and the installed image should start-up
     97[[br]]
     98[#point8 Top of Page]
     99[[br]]
     100----
     101'''8.045 Kathrein UFC960''' [=#point8.045] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     102----
     103'' How do I install a Kathrein UFS960 update image? ''
     104 * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched.
     105 * Visit the AAF digital forum and download the latest TitanNit firmware .  ([#point8.15 IRD Download Locations])
     106 * Extract the zip file
     107 * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs960/ .
     108     Note: The USB stick should not be formatted with windows, but a separate program, such as the
     109     " HP USB Disk Storage Format Tool" (freeware program).
     110     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     111 * Turn off the Receiver and disconnect all USB devices.
     112 * Connect the USB stick with the img file
     113 * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears,
     114   then the installation begins. Only after that message release the -TV/Radio button-
     115     Note: If installation does not start, use a different USB stick.
     116 * After successfully installing the receiver will reboot and the installed image should start-up
     117[[br]]
     118[#point8 Top of Page]
     119[[br]]
     120
     121----
     122'''8.046 Uninstalling Titan''' [=#point8.046] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     123----
     124If you have an Katherin UFS receiver all you have to do is install your original IMG file as explained above and no bootloader changes are neccessary.
     125
     126[[br]]
     127[#point8 Top of Page]
     128[[br]]
     129
     130----   
     131'''8.047 Update TitanNit''' [=#point8.047] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     132----
     133There are two ways to update your TitanNit version and there are merits to both methods :
     134
     135IRD offline method see [#point8 Ipbox contents] and select your Reciever model to show information on how to update titan using an IRD titannit image.
     136[[br]]
     137''Note: using this method plugins and files stored to Flash will be formatted when the update is proformed.
     138Plugins and files installed to MNT (except on the ufs 910/922) or a valid configured storage device will retain there settings .''
     139
     140Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
     141[[br]]
     142''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
     143[[br]]
     144[#point8 Top of Page]
     145[[br]]
     146
     147----   
     148'''8.048 IRD Download Locations''' [=#point8.048] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page]) 
     149----
     150[http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]] 
     151 
     152[[br]] 
     153[#point8 Top of Page] 
     154[[br]]