Changes between Version 1 and Version 2 of fr/Installation-Recovery-SH4-Homecast

Timestamp:

Jan 12, 2026, 11:57:09 AM (3 months ago)

Author:

trac

Comment:

--

fr/Installation-Recovery-SH4-Homecast

@@ +1 @@
+----
+'''8.020 Homecast''' [=#point8.020] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+
+Fortis is a Korean manufacture of satellite receivers that have a range of models that are compatible with TitanNit. These receivers were sold around the world to various resellers with customized bootloaders to lock them to a specific sales region, TitanNit installation is possible after the installation of a Atevio compatible bootloader.
+
+'''SH4 Homecast Contents'''
+
+ * [#point8.021 8.021 Homecast pro]
+
+
+'''Additional Info'''
+
+ * [#point8.022 8.022 Uninstallation]
+ * [#point8.023 8.025 Update TitanNit]
+ * [#point8.024 8.024 IRD Download Location]
+
+----
+'''8.021 Homecast Pro''' [=#point8.021] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+'' How do I install an Homecast UPDATEUSB Image? ''
+ * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.2 IRD Download Locations])
+ * Extract the zip file
+ * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick.
+     Note: The USB stick should not be formatted with windows. Use a separate program, such as the 
+     " HP USB Disk Storage Format Tool" (freeware program).
+     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
+ * Turn off the Receiver and disconnect all USB devices.
+ * Connect the USB stick with the IMG file to your Receiver
+* Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears,
+    then the installation starts. Only then release the button 
+     Note: If installation does not start, use a different USB stick. 
+ * The installation is finished when DONE appears on the receiver. 
+ * Restart the machine after by the main switch again to .
+[[br]]
+[#point8 Top of Page]
+[[br]]
+
+---- 
+'''8.022 Uninstalling Titan''' [=#point8.022] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
+----
+If you have an Homecast receiver all you have to do is install your original IMG file as explained above and no bootloader changes are necessary.
+
+[[br]]
+[#point8 Top of Page]
+[[br]]
+
+----   
+'''8.023 Update TitanNit''' [=#point8.023] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])  
+----
+There are two ways to update your TitanNit version and there are merits to both methods :
+
+IRD offline method see [#point8.020 Homecast Contents] and select your Receiver model to show information on how to update titan using an IRD TitanNit image.
+[[br]]
+''Note: using this method plugins and files stored to Flash will be formatted when the update is preformed.
+Plugins and files installed to MNT or a valid configured storage device will retain there settings .''
+
+Image Online Method see [wiki:System-Update#point3.5.7 System update] for information on how preform an online update.
+[[br]]
+''Note: using this method all plugins and settings are retained as long as they are not installed in flash.''
+[[br]]
+[#point8 Top of Page]
+[[br]] 
+
+----   
+'''8.024 IRD Download Locations''' [=#point8.024] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main Page])  
+---- 
+
+* [http://www.aaf-digital.info/forum/downloads.php?do=cat&id=2 Stable Images] [http://www.aaf-digital.info/forum/pages.php?pageid=12 Nightly Images][[br]]  
+  
+[[br]]  
+[#point8 Top of Page]  
+[[br]] 
+