Changes between Version 1 and Version 2 of fr/Installation-Recovery-Mips-Sezam


Ignore:
Timestamp:
Jan 12, 2026, 11:57:09 AM (3 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • fr/Installation-Recovery-Mips-Sezam

    v1 v2  
     1----
     2'''8.100 Sezam-Marvel''' [=#point8.100] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
     3----
     4
     5manufacturer blurb....
     6
     7
     8
     9
     10
     11----
     12'''8.101 Sezam-Marvel''' [=#point8.101] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
     13----
     14''How do I install a Sezam-Marvel  update image? ''
     15 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     16 * Extract the zip file
     17 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
     18    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     19 * Turn off the Receiver and disconnect all USB devices.
     20 * Connect the USB stick with the update image file
     21 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     22
     23Note: If installation does not start, use a different USB stick.
     24•After successfully installing the receiver will reboot and the installed image should start-up
     25[[br]]
     26[#point8 Top of Page]
     27[[br]]
     28----
     29'''8.102 Sezam-1000HD''' [=#point8.102] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Sprachauswahl])
     30----
     31''How do I install a Sezam-1000HD  update image? ''
     32 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     33 * Extract the zip file
     34 * Now copy the unzipped firmware folder "enigma2" to a formatted FAT32 USB stick.
     35    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     36 * Turn off the Receiver and disconnect all USB devices.
     37 * Connect the USB stick with the update image file
     38 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     39
     40Note: If installation does not start, use a different USB stick.
     41•After successfully installing the receiver will reboot and the installed image should start-up
     42[[br]]
     43[#point8 Top of Page]
     44[[br]]