Changes between Version 1 and Version 2 of fr/Installation-Recovery-Mips-Miraclebox


Ignore:
Timestamp:
Jan 12, 2026, 11:57:09 AM (3 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • fr/Installation-Recovery-Mips-Miraclebox

    v1 v2  
     1----
     2'''8.090 Miraclebox''' [=#point8.090] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     3----
     4
     5manufacturer blurb......
     6
     7
     8
     9
     10
     11----
     12'''8.091 Miraclebox Ultra''' [=#point8.091] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     13----
     14'' How do I install an Miraclebox Ultra Update UBI image? ''
     15 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     16 * Extract the zip file
     17 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     18    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     19     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     20 * Turn off the Receiver and disconnect all USB devices.
     21 * Connect the USB stick with the IRD file to your Receiver
     22 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     23   then the installation begins, Only then release the button.
     24    Note: If installation does not start , use a different USB stick.
     25 * After successfully installing the receiver will reboot and the installed image should start-up
     26[[br]]
     27[#point8 Top of Page]
     28[[br]]
     29----
     30'''8.092 Miraclebox Mini''' [=#point8.092] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     31----
     32'' How do I install an Miraclebox Mini Update UBI image? ''
     33 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     34 * Extract the zip file
     35 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     36    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     37     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     38 * Turn off the Receiver and disconnect all USB devices.
     39 * Connect the USB stick with the IRD file to your Receiver
     40 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     41   then the installation begins, Only then release the button.
     42    Note: If installation does not start , use a different USB stick.
     43 * After successfully installing the receiver will reboot and the installed image should start-up
     44[[br]]
     45[#point8 Top of Page]
     46[[br]]