Changes between Version 1 and Version 2 of fr/Installation-Recovery-Mips-Golden-Interstar


Ignore:
Timestamp:
Jan 12, 2026, 11:57:09 AM (3 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • fr/Installation-Recovery-Mips-Golden-Interstar

    v1 v2  
     1----
     2'''8.080 Goldern interstar Xpeedlx1/2''' [=#point8.080] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     3----
     4
     5manufacturer blurb
     6
     7
     8
     9----
     10'''8.081 Goldern interstar Xpeedlx1/2''' [=#point8.081] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     11----
     12''How do I install a Xpeedlx1/2 update image? ''
     13 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     14 * Extract the zip file
     15 * Now copy the unzipped firmware folder "xpeedlx3"  to a formatted FAT32 USB stick.
     16    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     17 * Turn off the Receiver and disconnect all USB devices.
     18 * Connect the USB stick with the update image file
     19 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     20
     21Note: If installation does not start, use a different USB stick.
     22•After successfully installing the receiver will reboot and the installed image should start-up
     23[[br]]
     24[#point8 Top of Page]
     25[[br]]
     26----
     27'''8.082 goldern interstar Xpeedlx3''' [=#point8.082] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl])
     28----
     29''How do I install a Xpeedlx3 update image? ''
     30 * Visit the AAF digital forum and download the latest TitanNit firmware . ([#point8.33 IRD Download Locations])
     31 * Extract the zip file
     32 * Now copy the unzipped firmware folder "xpeedlx3" to a formatted FAT32 USB stick.
     33    Note: The USB stick should not be formatted with windows, but a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     34 * Turn off the Receiver and disconnect all USB devices.
     35 * Connect the USB stick with the update image file
     36 * Switch on (mains switch) and and when prompted on the vfd press the __Volume up__ button on the unit, then the installation begins. after the update starts release the __volume up__ button.
     37
     38Note: If installation does not start, use a different USB stick.
     39•After successfully installing the receiver will reboot and the installed image should start-up
     40[[br]]
     41[#point8 Top of Page]
     42[[br]]