Changes between Version 1 and Version 2 of fr/Installation-Recovery-Mips-Beyonwiz


Ignore:
Timestamp:
Jan 12, 2026, 11:57:09 AM (3 months ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • fr/Installation-Recovery-Mips-Beyonwiz

    v1 v2  
     1----
     2'''8.071 Beyonwiz''' [=#point8.070] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     3----
     4
     5
     6manufacturer blurb.....
     7
     8
     9----
     10'''8.071 Beyonwiz T4''' [=#point8.071] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page])
     11----
     12'' How do I install an Beyonwiz T4 Update UBI image? ''
     13 * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations])
     14 * Extract the zip file
     15 * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick.
     16    Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program).
     17     Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed.
     18 * Turn off the Receiver and disconnect all USB devices.
     19 * Connect the USB stick with the IRD file to your Receiver
     20 * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...".
     21   then the installation begins, Only then release the button.
     22    Note: If installation does not start , use a different USB stick.
     23 * After successfully installing the receiver will reboot and the installed image should start-up
     24[[br]]
     25[#point8 Top of Page]
     26[[br]]