Changes between Version 9 and Version 10 of en/Remote-Device-Control


Ignore:
Timestamp:
Mar 14, 2014, 9:08:19 AM (12 years ago)
Author:
channel
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • en/Remote-Device-Control

    v9 v10  
    8484 ||'''Resolution:''' ||This Key Switches the videomode.||
    8585 ||'''V.Format:''' ||This Key Switches the Video format.||
    86  ||'''Recall:''' ||This key can bring up the recent channel history so you can jump easilly between programs.||
     86 ||'''Recall:''' ||This key can bring up the recent channel history so you can jump easily between programs.||
    8787 ||'''Info:''' ||This Button displays the infobar.||
    88  ||'''fav:''' ||This button brings up the favourite and Boquet lists to easilly select programs.||
     88 ||'''fav:''' ||This button brings up the favourite and Bouquet lists to easily select programs.||
    8989 ||'''Menu:''' ||This key opens the menu.||
    9090 ||'''Sleep:''' ||This Key can setup the sleep timer.||
    … …  
    100100This section explains how to automatically search and program your universal remote control to operate your tv
    101101
    102 NOTE: If no inputs for 10 seconds during Setting the TV RC code the setting mode is terminated.
     102NOTE: If there are no inputs for 10 seconds during setting the TV RC code the setting mode is terminated.
    103103
    104104'''Automatic code search '''
    … …  
    118118   If you dont let go of the power key in time it will step to the next RC Power button code if this happens use the D-Pad down to rewind 5 codes to attempt to store the code again.
    119119
    120  * To interrupt the search mode, Press the Exit button for 2 seconds and return to normal operation or wait for 10 seconds with no key presses.
     120 * To interrupt the search mode, press the Exit button for 2 seconds and return to normal operation or wait for 10 seconds with no key presses.
    121121
    122122 * The remote control blinks 5 times at the end of the list if the tv has not turned off by the time your tv is not a supported model.
    … …  
    124124'''Reset remote to factory programming'''
    125125
    126 This will reset the remote back to a factory non programmed state, this is nessesary if the remote  needs to be reprogrammed to operate a new TV and was previously programmed.
     126This will reset the remote back to a factory non programmed state, this is necessary if the remote  needs to be reprogrammed to operate a new TV and was previously programmed.
    127127
    128128 * Press the TV / Atevio button on the remote (for at least 3 seconds) until the LED flashes twice.
    … …  
    295295[[br]]
    296296
    297  ||'''All''' ||Show All Channels from all Boquets .||
     297 ||'''All''' ||Show All Channels from all Bouquets .||
    298298 ||'''Sat''' ||Sort channels By Satellite.||
    299299 ||'''provider:''' ||Sort channels By provider.||
    300300 ||'''A-Z:''' ||Sort channels Alphabetically.||
    301  ||'''Boquets:''' ||Sort channels By Boquet.||
     301 ||'''Bouquets:''' ||Sort channels By Boquet.||
    302302
    303303
    … …  
    322322[[br]]
    323323
    324 This will bring up a list of the movie directory on the reciever please see ([#point103.120.5 Web Controls]) for more information
     324This will bring up a list of the movie directory on the receiver please see ([#point103.120.5 Web Controls]) for more information
    325325
    326326'''Timer''' [=#point4.3.4] ([#point4 top of the page])
    … …  
    355355
    356356 ||[[Image(source:/wiki/Wiki-Pictures/EN/tv.png)]] ||This button shows or hides the onscreen remote control ||
    357  ||[[Image(source:/wiki/Wiki-Pictures/EN/tv.png)]] ||This button turns off the Reciever ||
     357 ||[[Image(source:/wiki/Wiki-Pictures/EN/tv.png)]] ||This button turns off the Receiver ||
    358358 ||[[Image(source:/wiki/Wiki-Pictures/EN/tv.png)]] ||This button restarts the Receiver ||
    359359 ||[[Image(source:/wiki/Wiki-Pictures/EN/tv.png)]] ||This button restarts the GUI ||
    … …  
    402402 * Serial Interface Telnet Setup
    403403
    404   1 Connect a null modem cable between the Reciever and PC
     404  1 Connect a null modem cable between the Receiver and PC
    405405
    406406  2 Install the client found here: ([http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Putty])
    … …  
    412412After the above steps are completed you will now be presented with a console where you can login to your Receiver with a username and password.
    413413
    414 after entering your login information there are a few reciever specific functions that may be handy if you require information on basic telnet commands i suggest you have a look on [http://www.linux.org linux.org]
     414after entering your login information there are a few receiver specific functions that may be handy if you require information on basic telnet commands i suggest you have a look on [http://www.linux.org linux.org]
    415415
    416416'''Remote RC debugging'''
    … …  
    464464RGui is a TitanNit plugin which allows you to operate your Receiver from a different Receiver. Only the Gui is completely transmitted.
    465465
    466 Thus one can operate the reciever remotely, but not stream the TV signal.
     466Thus one can operate the receiver remotely, but not stream the TV signal.
    467467
    468468[[br]]
    … …  
    482482== Iboot is a boot loader. ==
    483483
    484 "written by Solala based on based on the project uboot by wolfgang denk [http://www.denx.de]"  (Iboot is included in versions of TitanNit from 1.32 for the atemio and atevio recievers) [[br]]
     484"written by Solala based on based on the project uboot by wolfgang denk [http://www.denx.de]"  (Iboot is included in versions of TitanNit from 1.32 for the atemio and atevio receivers) [[br]]
    485485Please note that there is differences between the Iboot menu structure on the different models of decoders.
    486486
    … …  
    612612[[br]]
    613613
    614 TitanNit provides its own Htmlapi that is freely distributed so that other developers may interface with a reciever running titan.
     614TitanNit provides its own Htmlapi that is freely distributed so that other developers may interface with a receiver running titan.
    615615
    616616
    … …  
    632632
    633633
    634 the output message back from the Reciever would be as follows:
     634the output message back from the Receiver would be as follows:
    635635
    636636 * __satname#orbitalpos__
    … …  
    651651[[Image(source:/wiki/Wiki-Pictures/EN/Filezilla.jpg)]][[br]]
    652652
    653 The section contains information on how to setup a FTP connection to your TitanNit Reciever.
    654 
    655 [[br]]
    656 
    657 Titan Has an inbuilt FTP Server that is able to be used to transfer files to and from your Reciever.
    658 
    659 To connect to your reciever you can connect via your browser in windows or use a dedicated FTP program as with many linux programs the default password and user name is "root" and port 21 is the default FTP interface port.
    660 
    661 You connect to your Reciever via internet explorer on your pc to do this you need to find the IP address fo the decoder from the system information menu [wiki:System-info-Network#point3.7.8.4 Network Information] of your reciever and type it into the address bas as follows:
     653The section contains information on how to setup a FTP connection to your TitanNit Receiver.
     654
     655[[br]]
     656
     657Titan Has an inbuilt FTP Server that is able to be used to transfer files to and from your Receiver.
     658
     659To connect to your receiver you can connect via your browser in windows or use a dedicated FTP program as with many linux programs the default password and user name is "root" and port 21 is the default FTP interface port.
     660
     661You connect to your receiver via internet explorer on your pc to do this you need to find the IP address fo the decoder from the system information menu [wiki:System-info-Network#point3.7.8.4 Network Information] of your receiver and type it into the address bas as follows:
    662662
    663663{{{ftp://Username:Password@Ip_Address:Port_Number}}}
    … …  
    673673----
    674674
    675 If you wish to run a script on startup of the Receiver you can install commands in the usercmd.sh to be proformed at the startup of the reciever.
     675If you wish to run a script on startup of the Receiver you can install commands in the usercmd.sh to be proformed at the startup of the receiver.
    676676
    677677a sample of the usercmd.sh is below:
    … …  
    688688the {{{__"# insert code here"__}}} section must be replaced by your commands.
    689689
    690 If you place the following code in to the usercmd.sh it will delete every time shift file on the internal hdd on startup of the reciever:
     690If you place the following code in to the usercmd.sh it will delete every time shift file on the internal hdd on startup of the receiver:
    691691
    692692{{{