Changes between Version 6 and Version 7 of en/Quick-Start-Guide

Timestamp:

May 18, 2014, 12:06:26 AM (12 years ago)

Author:

jonathan brophy

Comment:

add info on default transponder setup

en/Quick-Start-Guide

@@ -67 +67 @@
 you will then need to select the type of file system you wish to use on the hdd if you have no idea what to pick leave it as default, select an item and press the __"OK"__ button.
 
-[[Image(source:/wiki/Wiki-Pictures/EN/Format-Hdd.jpg, 50%)]]
+[[Image(source:/wiki/Wiki-Pictures/EN/Format-Hdd.jpg, 50%)]][[br]]
 
 Now that the Hdd is formatted you may set it up, go into the __"Menu"__ and select > __"System"__ > __"Storage Device"__ and select __"Configure device"__ 
@@ -86 +86 @@
 Before we can do this we need to program in a list of satellites and transponders as not all satellite lists are installed in the Reciever by default.
 
-''Setting up the Satellite lists''
-
-The simpliest way to do this is with the [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor]
-proform these steps in this sequence to import a list of satellites on to your receiver:
+''Setting up the default transponder/satellite lists''
+
+Programming in transponders can be quite daunting for new users so the devs have set up a simple way to program your transponders into yoru receiver, the [wiki:Create-Transponder-List#point3.5.1.7 Create Transponder List] function can download transponders for various services from the TitanNit online repo, this will save you from having to manually create these lists from your pc, receiver or from a satellite xml generator, this greatly simpifly channel and tuner setup.
+(Note that these transponder lists may not allways be 100% correct as services may change)
+
+[[Image(source:/wiki/Wiki-Pictures/EN/Create-Transponder-List.jpg, 50%)]][[br]]
+ 
+Go into the __"Menu"__ and select > __"System"__ > __"Channel setup"__ > __"Create Transponder List"__ and follow the onscreen propmts to download a current list of transponders from your selected tuner type.
+
+
+Alternativly you can use the[wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor] from your pc this is a little bit more flexible that you can just program in the satellites you wish to recieve as opposed to every satelite or transponder programmed into the repo, the hard core or pro users may prefer this option to customise their setup.
+
+Proform these steps in this sequence to import a list of satellites on to your receiver:
 
  * Download a satellite xml file for the satellites you wish to receive from an [[http://satellites-xml.eu/ | Online xml generator]]
@@ -96 +105 @@
 
 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/Import-Satellite.png)]]
+
 
  * Upload the satellite.xml file to your receiver
@@ -141 +151 @@
 Now you have your receiver setup you can start to watch tv if you exit from the menu after proforming the scan you should be presented with a high definition display of your local tv stations.
 but as you may notice they are un orginised and it may be hard finding the tv stations you wish to watch for this you can orginise them in to your own persionalised favourite menu's.
-The easyest way to do this is with the [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor]that you installed previously.
-
- * load up the software on your PC and read in the channel data as follows :
+The easyest way to do this is with the [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor].
+
+ * Download and install [wiki:External-Software-SatChannelListEditor#point9.3 SatChannelListEditor] to your pc and set up a connection to your receiver. 
+ * Read in the channel data as follows :
 
 [[Image(source:/wiki/Wiki-Pictures/EN/SCLE/6.png)]]