| 17 | | * [#point8.6 8.6 Atemio5200 and compatible Models] |
| 18 | | * [#point8.8 8.8 Ufs910] |
| 19 | | * [#point8.9 8.9 Ufs912] |
| 20 | | * [#point8.10 8.10 Ufs922] |
| 21 | | * [#point8.11 8.11 Installation on other Fortis Receivers] |
| 22 | | * [#point8.12 8.12 Uninstallation On other Fortis Receivers] |
| 23 | | * [#point8.13 8.13 Update TitanNit] |
| 24 | | * [#point8.14 8.14 IRD Download Location] |
| 25 | | |
| 26 | | |
| 27 | | [[br]] |
| 28 | | |
| 29 | | |
| | 17 | * [#point8.8 8.7 Ufs910] |
| | 18 | * [#point8.9 8.8 Ufs912] |
| | 19 | * [#point8.10 8.9 Ufs922] |
| | 20 | |
| | 21 | '''MIPS Models''' |
| | 22 | |
| | 23 | * [#point8.14 8.10 Atemio5000] |
| | 24 | * [#point8.15 8.11 Atemio5200] |
| | 25 | |
| | 26 | '''Aditional Info''' |
| | 27 | |
| | 28 | * [#point8.11 8.12 Installation on other Fortis Receivers] |
| | 29 | * [#point8.12 8.13 Uninstallation On other Fortis Receivers] |
| | 30 | * [#point8.13 8.14 Update TitanNit] |
| | 31 | * [#point8.14 8.15 IRD Download Location] |
| | 32 | [[br]] |
| | 33 | [[br]] |
| | 34 | [[br]] |
| | 35 | |
| | 36 | |
| | 37 | '''SH4 Models''' |
| 37 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
| 38 | | * Extract the zip file |
| 39 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 40 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 41 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 42 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 43 | | * Turn off the Receiver and disconnect all USB devices. |
| 44 | | * Connect the USB stick with the IRD file to your Receiver |
| 45 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 46 | | and the installation begins. Only then release the button |
| 47 | | Note: If installation does not start , use a different USB stick. |
| 48 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 49 | | [[br]] |
| 50 | | [#point8.1 Top of Page] |
| | 42 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 43 | * Extract the zip file |
| | 44 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 45 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 46 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 47 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 48 | * Turn off the Receiver and disconnect all USB devices. |
| | 49 | * Connect the USB stick with the IRD file to your Receiver |
| | 50 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| | 51 | and the installation begins. Only then release the button |
| | 52 | Note: If installation does not start , use a different USB stick. |
| | 53 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 54 | [[br]] |
| | 55 | [#point8.1 Top of Page] |
| | 56 | [[br]] |
| | 57 | |
| 79 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
| 80 | | * Extract the zip file |
| 81 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 82 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 83 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 84 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 85 | | * Turn off the Receiver and disconnect all USB devices. |
| 86 | | * Connect the USB stick with the IRD file to your Receiver |
| 87 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 88 | | and the installation begins. Only then release the button |
| 89 | | Note: If installation does not start , use a different USB stick. |
| 90 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 91 | | [[br]] |
| 92 | | [#point8.1 Top of Page] |
| | 81 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 82 | * Extract the zip file |
| | 83 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 84 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 85 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 86 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 87 | * Turn off the Receiver and disconnect all USB devices. |
| | 88 | * Connect the USB stick with the IRD file to your Receiver |
| | 89 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| | 90 | and the installation begins. Only then release the button |
| | 91 | Note: If installation does not start , use a different USB stick. |
| | 92 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 93 | [[br]] |
| | 94 | [#point8.1 Top of Page] |
| | 95 | [[br]] |
| 100 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
| 101 | | * Extract the zip file |
| 102 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 103 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 104 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 105 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 106 | | * Turn off the Receiver and disconnect all USB devices. |
| 107 | | * Connect the USB stick with the IRD file to your Receiver |
| 108 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 109 | | and the installation begins. Only then release the button |
| 110 | | Note: If installation does not start , use a different USB stick. |
| 111 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 112 | | [[br]] |
| 113 | | [#point8.1 Top of Page] |
| | 101 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 102 | * Extract the zip file |
| | 103 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 104 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 105 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 106 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 107 | * Turn off the Receiver and disconnect all USB devices. |
| | 108 | * Connect the USB stick with the IRD file to your Receiver |
| | 109 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| | 110 | and the installation begins. Only then release the button |
| | 111 | Note: If installation does not start , use a different USB stick. |
| | 112 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 113 | [[br]] |
| | 114 | [#point8.1 Top of Page] |
| | 115 | [[br]] |
| 118 | | |
| 119 | | [[br]] |
| 120 | | |
| 121 | | '' How do I install an Atemio 700 IRD image? '' |
| 122 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
| 123 | | * Extract the zip file |
| 124 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 125 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 126 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 127 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 128 | | * Turn off the Receiver and disconnect all USB devices. |
| 129 | | * Connect the USB stick with the IRD file to your Receiver |
| 130 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 131 | | and the installation begins. Only then release the button |
| 132 | | Note: If installation does not start , use a different USB stick. |
| 133 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 134 | | [[br]] |
| 135 | | [#point8.1 Top of Page] |
| | 120 | '' How do I install an Atemio 7600 IRD image? '' |
| | 121 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 122 | * Extract the zip file |
| | 123 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 124 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 125 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 126 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 127 | * Turn off the Receiver and disconnect all USB devices. |
| | 128 | * Connect the USB stick with the IRD file to your Receiver |
| | 129 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| | 130 | and the installation begins. Only then release the button |
| | 131 | Note: If installation does not start , use a different USB stick. |
| | 132 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 133 | [[br]] |
| | 134 | [#point8.1 Top of Page] |
| | 135 | [[br]] |
| 144 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . |
| 145 | | * Extract the zip file |
| 146 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 147 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 148 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 149 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 150 | | * Turn off the Receiver and disconnect all USB devices. |
| 151 | | * Connect the USB stick with the IRD file to your Receiver |
| 152 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 153 | | and the installation begins. Only then release the button |
| 154 | | Note: If installation does not start , use a different USB stick. |
| 155 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 156 | | [[br]] |
| 157 | | [#point8.1 Top of Page] |
| 158 | | |
| 159 | | ---- |
| 160 | | '''8.7 Atevio5200''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 161 | | ---- |
| 162 | | |
| 163 | | [[br]] |
| 164 | | |
| 165 | | '' How do I install an Atemio 5200 image? '' |
| 166 | | |
| 167 | | Currently we dont have this information available and will be updated in the future to reflect this |
| 168 | | |
| 169 | | [[br]] |
| 170 | | [#point8.1 Top of Page] |
| 171 | | |
| 172 | | |
| 173 | | ---- |
| 174 | | '''8.8 Kathrein Ufs910''' [=#point8.8] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 175 | | ---- |
| 176 | | |
| 177 | | [[br]] |
| 178 | | |
| | 141 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 142 | * Extract the zip file |
| | 143 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 144 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 145 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 146 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 147 | * Turn off the Receiver and disconnect all USB devices. |
| | 148 | * Connect the USB stick with the IRD file to your Receiver |
| | 149 | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| | 150 | and the installation begins. Only then release the button |
| | 151 | Note: If installation does not start , use a different USB stick. |
| | 152 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 153 | [[br]] |
| | 154 | [#point8.1 Top of Page] |
| | 155 | [[br]] |
| | 156 | |
| | 157 | ---- |
| | 158 | '''8.7 Kathrein Ufs910''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 159 | ---- |
| 240 | | |
| 241 | | |
| 242 | | ---- |
| 243 | | '''8.11 installation on other Fortis Receivers''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 244 | | ---- |
| 245 | | |
| 246 | | [[br]] |
| 247 | | |
| | 217 | [[br]] |
| | 218 | [[br]] |
| | 219 | [[br]] |
| | 220 | |
| | 221 | '''Mips Models''' |
| | 222 | ---- |
| | 223 | '''8.10 Atevio5000''' [=#point8.10] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 224 | ---- |
| | 225 | '' How do I install an Atemio 5000 Update UBI image? '' |
| | 226 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 227 | * Extract the zip file |
| | 228 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 229 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 230 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 231 | * Turn off the Receiver and disconnect all USB devices. |
| | 232 | * Connect the USB stick with the IRD file to your Receiver |
| | 233 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 234 | then the installation begins, Only then release the button. |
| | 235 | Note: If installation does not start , use a different USB stick. |
| | 236 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 237 | [[br]] |
| | 238 | [#point8.1 Top of Page] |
| | 239 | [[br]] |
| | 240 | |
| | 241 | ---- |
| | 242 | '''8.11 Atevio5200''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 243 | ---- |
| | 244 | '' How do I install an Atemio 5200 Update UBI image? '' |
| | 245 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 246 | * Extract the zip file |
| | 247 | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| | 248 | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| | 249 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 250 | * Turn off the Receiver and disconnect all USB devices. |
| | 251 | * Connect the USB stick with the IRD file to your Receiver |
| | 252 | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| | 253 | then the installation begins, Only then release the button. |
| | 254 | Note: If installation does not start , use a different USB stick. |
| | 255 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 256 | [[br]] |
| | 257 | [#point8.1 Top of Page] |
| | 258 | [[br]] |
| | 259 | [[br]] |
| | 260 | [[br]] |
| | 261 | |
| | 262 | |
| | 263 | '''Mips Models'''---- |
| | 264 | '''8.12 installation on other Fortis Receivers''' [=#point8.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 265 | ---- |
![(please configure the [header_logo] section in trac.ini)](/openaaf/chrome/common/titannit_trac_banner.png)
