| | 5 | This section contains information on installation and removal of TitanNit from your receiver |
| | 6 | {{{#!div style="width: 1100px; margin: auto" |
| | 7 | {{{#!table style="border: none" |
| | 8 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 9 | {{{#!div style="float: left" |
| | 10 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]] |
| | 11 | }}} |
| | 12 | '''SH4 Atemio'''[[br]] |
| | 13 | {{{#!div style="float: left |
| | 14 | [http://www.atemio.de Atemio homepage] |
| | 15 | * [wiki:Installation-Recovery-SH4-Atemio#point8.000 Contents] |
| | 16 | * [wiki:Installation-Recovery-SH4-Atemio#point8.001 Atemio510] |
| | 17 | * [wiki:Installation-Recovery-SH4-Atemio#point8.002 Atemio520] |
| | 18 | * [wiki:Installation-Recovery-SH4-Atemio#point8.003 Atemio530] |
| | 19 | * [wiki:Installation-Recovery-SH4-Atemio#point8.004 Atemio7600] |
| | 20 | * [wiki:Installation-Recovery-SH4-Atemio#point8.005 Atemio700] |
| | 21 | * [wiki:Installation-Recovery-SH4-Atemio#point8.006 Atemio7000] |
| | 22 | }}} |
| | 23 | }}} |
| | 24 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 25 | {{{#!div style="float: left" |
| | 26 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Fortis.png, 60px,align=left,link=http://www.fortis.co.kr Fortis homepage)]] |
| | 27 | }}} |
| | 28 | '''SH4 Fortis'''[[br]] |
| | 29 | {{{#!div style="float: left |
| | 30 | [http://www.fortis.co.kr Fortis homepage] |
| | 31 | * [wiki:Installation-Recovery-SH4-Fortis#point8.010 Contents] |
| | 32 | * [wiki:Installation-Recovery-SH4-Fortis#point8.011 Fortis Clone] |
| | 33 | * [wiki:Installation-Recovery-SH4-Fortis#point8.012 Bootloader Installation] |
| | 34 | * [wiki:Installation-Recovery-SH4-Fortis#point8.013 Fortis FS-9000] |
| | 35 | * [wiki:Installation-Recovery-SH4-Fortis#point8.014 Fortis FS-9200] |
| | 36 | * [wiki:Installation-Recovery-SH4-Fortis#point8.015 Fortis HS-9510] |
| | 37 | * [wiki:Installation-Recovery-SH4-Fortis#point8.016 Fortis HX-8200] |
| | 38 | * [wiki:Installation-Recovery-SH4-Fortis#point8.017 Fortis HS-7810] |
| | 39 | }}} |
| | 40 | }}} |
| | 41 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 42 | {{{#!div style="float: left" |
| | 43 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/homecast.png, 60px,align=left,link=http://www.myhomecast.nl Homecast homepage)]] |
| | 44 | }}} |
| | 45 | '''SH4 Homecast'''[[br]] |
| | 46 | {{{#!div style="float: left |
| | 47 | [http://www.myhomecast.nl Homecast homepage] |
| | 48 | * [wiki:Installation-Recovery-SH4-Homecast#point8.020 Contents] |
| | 49 | * [wiki:Installation-Recovery-SH4-Homecast#point8.021 Homecast Pro] |
| | 50 | }}} |
| | 51 | }}} |
| | 52 | |---- |
| | 53 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 54 | {{{#!div style="float: left" |
| | 55 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/IPBox.png, 60px,align=left,link=http://www.abipbox.com/ AB IPBox homepage)]] |
| | 56 | }}} |
| | 57 | '''SH4 IPBox'''[[br]] |
| | 58 | {{{#!div style="float: left |
| | 59 | [http://www.abipbox.com/ AB IPBox homepage] |
| | 60 | * [wiki:Installation-Recovery-SH4-IPBox#point8.030 Contents] |
| | 61 | * [wiki:Installation-Recovery-SH4-IPBox#point8.031 Ipbox91] |
| | 62 | * [wiki:Installation-Recovery-SH4-IPBox#point8.032 Ipbox900] |
| | 63 | * [wiki:Installation-Recovery-SH4-IPBox#point8.033 Ipbox910] |
| | 64 | * [wiki:Installation-Recovery-SH4-IPBox#point8.034 Ipbox9000] |
| | 65 | }}} |
| | 66 | }}} |
| | 67 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 68 | {{{#!div style="float: left" |
| | 69 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/kathrein.png, 60px,align=left,link=http://www.kathrein-gmbh.at kathrein homepage)]] |
| | 70 | }}} |
| | 71 | '''SH4 Katherin'''[[br]] |
| | 72 | {{{#!div style="float: left |
| | 73 | [http://www.kathrein-gmbh.at kathrein homepage] |
| | 74 | * [wiki:Installation-Recovery-SH4-Katherin#point8.040 Contents] |
| | 75 | * [wiki:Installation-Recovery-SH4-Katherin#point8.041 Ufs910] |
| | 76 | * [wiki:Installation-Recovery-SH4-Katherin#point8.042 Ufs912] |
| | 77 | * [wiki:Installation-Recovery-SH4-Katherin#point8.043 Ufs913] |
| | 78 | * [wiki:Installation-Recovery-SH4-Katherin#point8.044 Ufs922] |
| | 79 | * [wiki:Installation-Recovery-SH4-Katherin#point8.045 Ufc960] |
| | 80 | }}} |
| | 81 | }}} |
| | 82 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 83 | {{{#!div style="float: left" |
| | 84 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Spark.png, 60px,align=left,link=http://www.spark-tv.com Spark homepage)]] |
| | 85 | }}} |
| | 86 | '''SH4 Spark'''[[br]] |
| | 87 | {{{#!div style="float: left |
| | 88 | [http://www.spark-tv.com Spark homepage] |
| | 89 | * [wiki:Installation-Recovery-SH4-Spark#point8.050 Contents] |
| | 90 | * [wiki:Installation-Recovery-SH4-Spark#point8.051 Spark7111] |
| | 91 | * [wiki:Installation-Recovery-SH4-Spark#point8.052 Spark7162] |
| | 92 | }}} |
| | 93 | }}} |
| | 94 | |---- |
| | 95 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 96 | {{{#!div style="float: left" |
| | 97 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/Atemio.png, 60px,align=left,link=http://www.atemio.de Atemio homepage)]] |
| | 98 | }}} |
| | 99 | '''Mips Atemio'''[[br]] |
| | 100 | {{{#!div style="float: left |
| | 101 | [http://www.atemio.de Atemio homepage] |
| | 102 | * [wiki:Installation-Recovery-Mips-Atemio#point8.060 Contents] |
| | 103 | * [wiki:Installation-Recovery-Mips-Atemio#point8.061 Atemio5000 AKA Nemesis] |
| | 104 | * [wiki:Installation-Recovery-Mips-Atemio#point8.062 Atemio5200] |
| | 105 | * [wiki:Installation-Recovery-Mips-Atemio#point8.063 Atemio6000] |
| | 106 | * [wiki:Installation-Recovery-Mips-Atemio#point8.064 Atemio6100] |
| | 107 | * [wiki:Installation-Recovery-Mips-Atemio#point8.065 Atemio6200] |
| | 108 | }}} |
| | 109 | }}} |
| | 110 | {{{#!td align=center valign=top style="border: none; font-size: 115%" |
| | 111 | {{{#!div style="float: left" |
| | 112 | [[Image(source:/wiki/Wiki-Pictures/Common/Icons/Receiver_logo/beyonwiz.png, 60px,align=left,link=http://www.beyonwiz.com.au Beyonwiz homepage)]] |
| | 113 | }}} |
| | 114 | '''Mips Beyonwiz'''[[br]] |
| | 115 | {{{#!div style="float: left |
| | 116 | [http://www.beyonwiz.com.au Beyonwiz homepage] |
| 42 | | '''SH4 Models''' |
| 43 | | ---- |
| 44 | | '''8.1 Atemio510''' [=#point8.1] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 45 | | ---- |
| 46 | | '' How do I install an Atemio 510 IRD image? '' |
| 47 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 48 | | * Extract the zip file |
| 49 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 50 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 51 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 52 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 53 | | * Turn off the Receiver and disconnect all USB devices. |
| 54 | | * Connect the USB stick with the IRD file to your Receiver |
| 55 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 56 | | and the installation begins. Only then release the button |
| 57 | | Note: If installation does not start , use a different USB stick. |
| 58 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 59 | | [[br]] |
| 60 | | [#point8.1 Top of Page] |
| 61 | | [[br]] |
| 62 | | |
| 63 | | ---- |
| 64 | | '''8.2 Atemio520''' [=#point8.2] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 65 | | ---- |
| 66 | | '' How do I install an Atemio 520 IRD image? '' |
| 67 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 68 | | * Extract the zip file |
| 69 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 70 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 71 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 72 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 73 | | * Turn off the Receiver and disconnect all USB devices. |
| 74 | | * Connect the USB stick with the IRD file to your Receiver |
| 75 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 76 | | and the installation begins. Only then release the button |
| 77 | | Note: If installation does not start , use a different USB stick. |
| 78 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 79 | | [[br]] |
| 80 | | [#point8.1 Top of Page] |
| 81 | | |
| 82 | | ---- |
| 83 | | '''8.3 Atemio530''' [=#point8.3] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 84 | | ---- |
| 85 | | '' How do I install an Atemio 530 IRD image? '' |
| 86 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 87 | | * Extract the zip file |
| 88 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 89 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 90 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 91 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 92 | | * Turn off the Receiver and disconnect all USB devices. |
| 93 | | * Connect the USB stick with the IRD file to your Receiver |
| 94 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 95 | | and the installation begins. Only then release the button |
| 96 | | Note: If installation does not start , use a different USB stick. |
| 97 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 98 | | [[br]] |
| 99 | | [#point8.1 Top of Page] |
| 100 | | [[br]] |
| 101 | | |
| 102 | | ---- |
| 103 | | '''8.4 Atemio7600''' [=#point8.4] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 104 | | ---- |
| 105 | | '' How do I install an Atemio 7600 IRD image? '' |
| 106 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 107 | | * Extract the zip file |
| 108 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 109 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 110 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 111 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 112 | | * Turn off the Receiver and disconnect all USB devices. |
| 113 | | * Connect the USB stick with the IRD file to your Receiver |
| 114 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 115 | | and the installation begins. Only then release the button |
| 116 | | Note: If installation does not start , use a different USB stick. |
| 117 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 118 | | [[br]] |
| 119 | | [#point8.1 Top of Page] |
| 120 | | [[br]] |
| 121 | | |
| 122 | | ---- |
| 123 | | '''8.5 Atevio700''' [=#point8.5] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 124 | | ---- |
| 125 | | '' How do I install an Atemio 7600 IRD image? '' |
| 126 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 127 | | * Extract the zip file |
| 128 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 129 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 130 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 131 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 132 | | * Turn off the Receiver and disconnect all USB devices. |
| 133 | | * Connect the USB stick with the IRD file to your Receiver |
| 134 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 135 | | and the installation begins. Only then release the button |
| 136 | | Note: If installation does not start , use a different USB stick. |
| 137 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 138 | | [[br]] |
| 139 | | [#point8.1 Top of Page] |
| 140 | | [[br]] |
| 141 | | |
| 142 | | ---- |
| 143 | | '''8.6 Atevio7000''' [=#point8.6] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 144 | | ---- |
| 145 | | '' How do I install an Atemio 7000 IRD image? '' |
| 146 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 147 | | * Extract the zip file |
| 148 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 149 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 150 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 151 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 152 | | * Turn off the Receiver and disconnect all USB devices. |
| 153 | | * Connect the USB stick with the IRD file to your Receiver |
| 154 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 155 | | and the installation begins. Only then release the button |
| 156 | | Note: If installation does not start , use a different USB stick. |
| 157 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 158 | | [[br]] |
| 159 | | [#point8.1 Top of Page] |
| 160 | | [[br]] |
| 161 | | ---- |
| 162 | | '''8.7 Ipbox91''' [=#point8.7] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| 163 | | ---- |
| 164 | | '' How do I install an Ipbox 91 UPDATEUSB Image? '' |
| 165 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 166 | | * Extract the zip file |
| 167 | | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| 168 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 169 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 170 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 171 | | * Turn off the Receiver and disconnect all USB devices. |
| 172 | | * Connect the USB stick with the IMG file to your Receiver |
| 173 | | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| 174 | | then the installation starts. Only then release the button |
| 175 | | Note: If installation does not start, use a different USB stick. |
| 176 | | * The installation is finished when DONE appears on the receiver. |
| 177 | | * Restart the machine after by the main switch again to . |
| 178 | | [[br]] |
| 179 | | |
| 180 | | [[br]] |
| 181 | | ---- |
| 182 | | '''8.8 Ipbox900''' [=#point8.8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| 183 | | ---- |
| 184 | | '' How do I install an Ipbox 900 UPDATEUSB Image? '' |
| 185 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 186 | | * Extract the zip file |
| 187 | | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| 188 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 189 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 190 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 191 | | * Turn off the Receiver and disconnect all USB devices. |
| 192 | | * Connect the USB stick with the IMG file to your Receiver |
| 193 | | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| 194 | | then the installation starts. Only then release the button |
| 195 | | Note: If installation does not start, use a different USB stick. |
| 196 | | * The installation is finished when DONE appears on the receiver. |
| 197 | | * Restart the machine after by the main switch again to . |
| 198 | | |
| 199 | | [[br]] |
| 200 | | ---- |
| 201 | | '''8.9 Ipbox910''' [=#point8.9] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| 202 | | ---- |
| 203 | | '' How do I install an Ipbox 910 UPDATEUSB Image? '' |
| 204 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 205 | | * Extract the zip file |
| 206 | | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| 207 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 208 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 209 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 210 | | * Turn off the Receiver and disconnect all USB devices. |
| 211 | | * Connect the USB stick with the IMG file to your Receiver |
| 212 | | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| 213 | | then the installation starts. Only then release the button |
| 214 | | Note: If installation does not start, use a different USB stick. |
| 215 | | * The installation is finished when DONE appears on the receiver. |
| 216 | | * Restart the machine after by the main switch again to . |
| 217 | | |
| 218 | | [[br]] |
| 219 | | ---- |
| 220 | | '''8.10 Ipbox9000''' [=#point8.10] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| 221 | | ---- |
| 222 | | '' How do I install an Ipbox 9000 UPDATEUSB Image? '' |
| 223 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 224 | | * Extract the zip file |
| 225 | | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| 226 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 227 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 228 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 229 | | * Turn off the Receiver and disconnect all USB devices. |
| 230 | | * Connect the USB stick with the IMG file to your Receiver |
| 231 | | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| 232 | | then the installation starts. Only then release the button |
| 233 | | Note: If installation does not start, use a different USB stick. |
| 234 | | * The installation is finished when DONE appears on the receiver. |
| 235 | | * Restart the machine after by the main switch again to . |
| 236 | | |
| 237 | | |
| 238 | | ---- |
| 239 | | '''8.11 Kathrein Ufs910''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 240 | | ---- |
| 241 | | '' How do I install a Kathrein UFS910 update image? '' |
| 242 | | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. |
| 243 | | * Visit the AAF digital forum and download the latest TitanNit firmware . |
| 244 | | * Extract the zip file |
| 245 | | * Now copy the unzipped img firmware file - must be renamed to miniFLASH.img - to a formatted FAT32 USB stick. |
| 246 | | Note: The USB stick should not be formatted with windows, but a separate program, such as the |
| 247 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 248 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 249 | | * Turn off the Receiver and disconnect all USB devices. |
| 250 | | * Connect the USB stick with the img file to the front USB Port |
| 251 | | * Switch on (mains switch) and at the same time hold the -Record button- on the Remote Control pressed (about 5 seconds) |
| 252 | | until "miniFLASH search..." appears, then the installation begins. Only then release the -Record button- |
| 253 | | Note: If installation does not start, use a different USB stick. |
| 254 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 255 | | [[br]] |
| 256 | | [#point8.1 Top of Page] |
| 257 | | [[br]] |
| 258 | | |
| 259 | | ---- |
| 260 | | '''8.12 Kathrein UFS912''' [=#point8.12] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 261 | | ---- |
| 262 | | '' How do I install a Kathrein UFS912 update image? '' |
| 263 | | * Visit the AAF digital forum and download the latest TitanNit firmware . |
| 264 | | * Extract the zip file |
| 265 | | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs912/ . |
| 266 | | Note: The USB stick should not be formatted with windows, but a separate program, such as the |
| 267 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 268 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 269 | | * Turn off the Receiver and disconnect all USB devices. |
| 270 | | * Connect the USB stick with the img file |
| 271 | | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, |
| 272 | | then the installation begins. Only after that message release the -TV/Radio button- |
| 273 | | Note: If installation does not start, use a different USB stick. |
| 274 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 275 | | [[br]] |
| 276 | | [#point8.1 Top of Page] |
| 277 | | [[br]] |
| 278 | | |
| 279 | | ---- |
| 280 | | '''8.13 Kathrein UFS913''' [=#point8.13] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 281 | | ---- |
| 282 | | '' How do I install a Kathrein UFS913 update image? '' |
| 283 | | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. |
| 284 | | * Visit the AAF digital forum and download the latest TitanNit firmware . |
| 285 | | * Extract the zip file |
| 286 | | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . |
| 287 | | Note: The USB stick should not be formatted with windows, but a separate program, such as the |
| 288 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 289 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 290 | | * Turn off the Receiver and disconnect all USB devices. |
| 291 | | * Connect the USB stick with the img file |
| 292 | | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, |
| 293 | | then the installation begins. Only after that message release the -TV/Radio button- |
| 294 | | Note: If installation does not start, use a different USB stick. |
| 295 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 296 | | [[br]] |
| 297 | | [#point8.1 Top of Page] |
| 298 | | [[br]] |
| 299 | | |
| 300 | | ---- |
| 301 | | '''8.14 Kathrein UFS922''' [=#point8.14] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 302 | | ---- |
| 303 | | '' How do I install a Kathrein UFS922 update image? '' |
| 304 | | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. |
| 305 | | * Visit the AAF digital forum and download the latest TitanNit firmware . |
| 306 | | * Extract the zip file |
| 307 | | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . |
| 308 | | Note: The USB stick should not be formatted with windows, but a separate program, such as the |
| 309 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 310 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 311 | | * Turn off the Receiver and disconnect all USB devices. |
| 312 | | * Connect the USB stick with the img file |
| 313 | | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, |
| 314 | | then the installation begins. Only after that message release the -TV/Radio button- |
| 315 | | Note: If installation does not start, use a different USB stick. |
| 316 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 317 | | [[br]] |
| 318 | | [#point8.1 Top of Page] |
| 319 | | [[br]] |
| 320 | | [[br]] |
| 321 | | [[br]] |
| 322 | | |
| 323 | | '''Mips Models''' |
| 324 | | ---- |
| 325 | | '''8.20 Atevio5000''' [=#point8.20] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 326 | | ---- |
| 327 | | '' How do I install an Atemio 5000 Update UBI image? '' |
| 328 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 329 | | * Extract the zip file |
| 330 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 331 | | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| 332 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 333 | | * Turn off the Receiver and disconnect all USB devices. |
| 334 | | * Connect the USB stick with the IRD file to your Receiver |
| 335 | | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| 336 | | then the installation begins, Only then release the button. |
| 337 | | Note: If installation does not start , use a different USB stick. |
| 338 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 339 | | [[br]] |
| 340 | | [#point8.1 Top of Page] |
| 341 | | [[br]] |
| 342 | | |
| 343 | | ---- |
| 344 | | '''8.21 Atevio5200''' [=#point8.21] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 345 | | ---- |
| 346 | | '' How do I install an Atemio 5200 Update UBI image? '' |
| 347 | | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| 348 | | * Extract the zip file |
| 349 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 350 | | Note: After unpacking two subfolders atemio/5x00 will be created . The USB stick should not be formatted with windows. Use a separate program, such as the " HP USB Disk Storage Format Tool" (freeware program). |
| 351 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 352 | | * Turn off the Receiver and disconnect all USB devices. |
| 353 | | * Connect the USB stick with the IRD file to your Receiver |
| 354 | | * Switch on ( mains plug ) and press the CH + on the unit (1 button from the right ) until the Vfd ( LCD Display) displayes " Flashing ...". |
| 355 | | then the installation begins, Only then release the button. |
| 356 | | Note: If installation does not start , use a different USB stick. |
| 357 | | * After successfully installing the receiver will reboot and the installed image should start-up |
| 358 | | [[br]] |
| 359 | | [#point8.1 Top of Page] |
| 360 | | [[br]] |
| 361 | | [[br]] |
| 362 | | [[br]] |
| 363 | | |
| 364 | | |
| 365 | | '''Aditional Info''' |
| 366 | | ---- |
| 367 | | '''8.30 installation on other Fortis Receivers''' [=#point8.30] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 368 | | ---- |
| 369 | | '''Installation Notes:''' |
| 370 | | |
| 371 | | ''If you wish to try or install titan you need to install an Atemio/Atevio factory loader. The original Atemio Bootloader has a security code within so an installation of Titan is not possible with any other fortis loader'' |
| 372 | | |
| 373 | | ''If you wish to install Titan the loader version must be 1.54 or above. Titan versions above 1.32 require the new Iboot loader which needs to be installed first if not present.'' |
| 374 | | |
| 375 | | ''There are various ways that are explained below:'' |
| 376 | | |
| 377 | | [[br]] |
| 378 | | |
| 379 | | '''AAF Recovery Tool (ART) method''' |
| 380 | | |
| 381 | | * Install the AAF Recovery Tool (ART) and set up a connection to your receiver |
| 382 | | * Set the IP address and subnet mask of your uboot environment. |
| 383 | | * Reboot the receiver and reconnect to change the settings. |
| 384 | | * Install the factory loader and reboot. |
| 385 | | * The factory loader you installed is version 1.21 that you have to update to 1.54 to be compatible with Titan |
| 386 | | * Visit the [http:((www-atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loaader (1.54). |
| 387 | | * Extract the zip file |
| 388 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 389 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 390 | | "HP USB Disk Storage Format Tool" (freeware program). |
| 391 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 392 | | * Turn off the receiver and disconnect all USB devices. |
| 393 | | * Connect the USB stick with the IRD file to your receiver |
| 394 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 395 | | and the installation begins. Only then release the button |
| 396 | | Note: Should the installation not start, try a different USB stick. |
| 397 | | * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up. |
| 398 | | |
| 399 | | ''You may now install Titan'' |
| 400 | | [[br]] |
| 401 | | |
| 402 | | |
| 403 | | [[br]] |
| 404 | | |
| 405 | | '''Cross Flash Method''' |
| 406 | | |
| 407 | | ''This method explains how to install the HDF bootloader flash plugin to your fortis receiver and flash an Atemio/Atevio compatible bootloader from the plugin menu.'' |
| 408 | | |
| 409 | | * Download the HDF Bootloader flash plugin from the [http://www.aaf-digital.info/forum AAF Digital forum]. |
| 410 | | * Extract the zip file |
| 411 | | * Now copy the unzipped Plugin folder to a formatted FAT32 USB stick. |
| 412 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 413 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 414 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 415 | | * go to the plugins section in your receiver and install the plugin and then start it. |
| 416 | | * type in the password contained in the zip file and follow the onscreen prompts. |
| 417 | | * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up. |
| 418 | | |
| 419 | | ''You may now install TitanNit'' |
| 420 | | |
| 421 | | [[br]] |
| 422 | | |
| 423 | | '''Reseller Changer Tool Method''' |
| 424 | | |
| 425 | | ''This method explains how to change the Reseler ID of an Atemio/Atevio compatible bootloader and flash it to any compatible Fortis receiver from the plugin menu.'' |
| 426 | | |
| 427 | | |
| 428 | | * Visit the [http://www.atemio.de Atemio] homepage or the [http://www.aaf-digital.info/forum AAF digital forum] and download the latest Atevio/Atemio loader. |
| 429 | | * Extract the zip file |
| 430 | | * use the reseller ID changer tool and change the IRD to that of your reseller ID. |
| 431 | | * Now copy the unzipped IRD firmware file to a formatted FAT32 USB stick. |
| 432 | | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| 433 | | " HP USB Disk Storage Format Tool" (freeware program). |
| 434 | | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| 435 | | * Turn off the Receiver and disconnect all USB devices. |
| 436 | | * Connect the USB stick with the IRD file to your Receiver. |
| 437 | | * Switch on (mains switch) and at the same time hold the CH + on the unit (about 15 seconds) until "search IRD File ... " appears, |
| 438 | | and the installation begins. Only then release the button |
| 439 | | Note: If installation does not start , use a different USB stick. |
| 440 | | * Should you have installed the loader successfully the receiver will reboot and the installed Loader should start-up. |
| 441 | | |
| 442 | | |
| 443 | | This method requires you to also change the reseller ID to be able to install TitanNit. |
| 444 | | |
| 445 | | |
| 446 | | '''Be aware should it the installation fail or a loss of Power occur during the flashing process you could brick your receiver as there is no recovery method. Compatibility with other receivers is not guaranteed but you may find a list of compatible receivers in the [wiki:Supported-Receivers#point7 Supported Receivers] section.''' |
| 447 | | [[br]] |
| 448 | | [#point8.1 Top of Page] |
| 449 | | ---- |
| 450 | | '''8.31 Uninstalling Titan''' [=#point8.31] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| 451 | | ---- |
| 452 | | If you have an Atemio/Atevio or UFS receiver all you have to do is install your original ird file as explained above and no bootloader changes are neccessary. |
| 453 | | |
| 454 | | Uninstalling titan and switching back to the original reseller loader can't be done (easily) for other fortis receivers but there is one simple alternative method outlined below. |
| 455 | | |
| 456 | | |
| 457 | | '''Uninstalling Titan on non Atemio/Atevio receiver and restore Reseller ID with Maxi-uboot''' |
| 458 | | |
| 459 | | If you have iboot installed then you must install a version of TitanNit older than 1.32 before using this method. |
| 460 | | |
| 461 | | This will install the factory Atemio loader that is compatible with the AAF Recovery Tool (ART) to be able to install the Maxiuboot Loader. |
| 462 | | |
| 463 | | In order for this method to work make sure the setting Allow __"Iboot Update"__ is enabled in [wiki:Remote-Device-Control#point4.6 Iboot]. |
| 464 | | |
| 465 | | When successfully achieved you may start up ART from your PC and install Maxiuboot. |
| 466 | | |
| 467 | | [[br]] |
| 468 | | |
| 469 | | Once installed you may set up your bootargs and change your Reseller ID back to its factory settings. For flashin original Firmware or other Software please refere to your receivers' manual or instructions. |
| 470 | | [[br]] |
| 471 | | [#point108.1 Top of Page] |
| 472 | | [[br]] |
| 473 | | |
![(please configure the [header_logo] section in trac.ini)](/openaaf/chrome/common/titannit_trac_banner.png)
