| 156 | | |
| 157 | | ---- |
| 158 | | '''8.7 Kathrein Ufs910''' [=#point8.7] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 161 | ---- |
| | 162 | '''8.7 Ipbox91''' [=#point8.7] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| | 163 | ---- |
| | 164 | '' How do I install an Ipbox 91 UPDATEUSB Image? '' |
| | 165 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 166 | * Extract the zip file |
| | 167 | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| | 168 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 169 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 170 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 171 | * Turn off the Receiver and disconnect all USB devices. |
| | 172 | * Connect the USB stick with the IMG file to your Receiver |
| | 173 | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| | 174 | then the installation starts. Only then release the button |
| | 175 | Note: If installation does not start, use a different USB stick. |
| | 176 | * The installation is finished when DONE appears on the receiver. |
| | 177 | * Restart the machine after by the main switch again to . |
| | 178 | [[br]] |
| | 179 | |
| | 180 | [[br]] |
| | 181 | ---- |
| | 182 | '''8.8 Ipbox900''' [=#point8.8] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| | 183 | ---- |
| | 184 | '' How do I install an Ipbox 900 UPDATEUSB Image? '' |
| | 185 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 186 | * Extract the zip file |
| | 187 | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| | 188 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 189 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 190 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 191 | * Turn off the Receiver and disconnect all USB devices. |
| | 192 | * Connect the USB stick with the IMG file to your Receiver |
| | 193 | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| | 194 | then the installation starts. Only then release the button |
| | 195 | Note: If installation does not start, use a different USB stick. |
| | 196 | * The installation is finished when DONE appears on the receiver. |
| | 197 | * Restart the machine after by the main switch again to . |
| | 198 | |
| | 199 | [[br]] |
| | 200 | ---- |
| | 201 | '''8.9 Ipbox910''' [=#point8.9] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| | 202 | ---- |
| | 203 | '' How do I install an Ipbox 910 UPDATEUSB Image? '' |
| | 204 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 205 | * Extract the zip file |
| | 206 | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| | 207 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 208 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 209 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 210 | * Turn off the Receiver and disconnect all USB devices. |
| | 211 | * Connect the USB stick with the IMG file to your Receiver |
| | 212 | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| | 213 | then the installation starts. Only then release the button |
| | 214 | Note: If installation does not start, use a different USB stick. |
| | 215 | * The installation is finished when DONE appears on the receiver. |
| | 216 | * Restart the machine after by the main switch again to . |
| | 217 | |
| | 218 | [[br]] |
| | 219 | ---- |
| | 220 | '''8.10 Ipbox9000''' [=#point8.10] ([wiki:Wiki#point0 Inhaltsverzeichnis]) ([WikiStart#point0 Sprachauswahl]) |
| | 221 | ---- |
| | 222 | '' How do I install an Ipbox 9000 UPDATEUSB Image? '' |
| | 223 | * Visit the Atemio homepage or the AAF digital forum and download the latest TitanNit firmware . ([#point8.15 IRD Download Locations]) |
| | 224 | * Extract the zip file |
| | 225 | * Now copy the unzipped IMG firmware file to a formatted FAT32 USB stick. |
| | 226 | Note: The USB stick should not be formatted with windows. Use a separate program, such as the |
| | 227 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 228 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 229 | * Turn off the Receiver and disconnect all USB devices. |
| | 230 | * Connect the USB stick with the IMG file to your Receiver |
| | 231 | * Switch on (mains plug) while holding in the Power button on the unit (one button from the left) hold it down (about 3 seconds) until "LOAD SW" appears, |
| | 232 | then the installation starts. Only then release the button |
| | 233 | Note: If installation does not start, use a different USB stick. |
| | 234 | * The installation is finished when DONE appears on the receiver. |
| | 235 | * Restart the machine after by the main switch again to . |
| | 236 | |
| | 237 | |
| | 238 | ---- |
| | 239 | '''8.11 Kathrein Ufs910''' [=#point8.11] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 299 | |
| | 300 | ---- |
| | 301 | '''8.14 Kathrein UFS922''' [=#point8.14] ([wiki:Wiki#point0 Contents]) ([WikiStart#point0 Main page]) |
| | 302 | ---- |
| | 303 | '' How do I install a Kathrein UFS922 update image? '' |
| | 304 | * When you install a USB .img file the mnt-filesystem is formatted. An Online Update leaves the mnt-filesystem untouched. |
| | 305 | * Visit the AAF digital forum and download the latest TitanNit firmware . |
| | 306 | * Extract the zip file |
| | 307 | * Now copy the unzipped firmware file *_FULL_nodebug.img to a formatted FAT32 USB stick into the path: /kathrein/ufs922/ . |
| | 308 | Note: The USB stick should not be formatted with windows, but a separate program, such as the |
| | 309 | " HP USB Disk Storage Format Tool" (freeware program). |
| | 310 | Furthermore, we recommend a cheap USB stick with a small storage capacity as well as read and write speed. |
| | 311 | * Turn off the Receiver and disconnect all USB devices. |
| | 312 | * Connect the USB stick with the img file |
| | 313 | * Switch on (mains switch) and at the same time press the -TV/Radio button- on the unit (about 5 seconds) until "emergency boot" appears, |
| | 314 | then the installation begins. Only after that message release the -TV/Radio button- |
| | 315 | Note: If installation does not start, use a different USB stick. |
| | 316 | * After successfully installing the receiver will reboot and the installed image should start-up |
| | 317 | [[br]] |
| | 318 | [#point8.1 Top of Page] |
| | 319 | [[br]] |
![(please configure the [header_logo] section in trac.ini)](/openaaf/chrome/common/titannit_trac_banner.png)
