# kbox config file # Number Of Tuners # xx ; xx=00 1 tuner (default) # xx ; xx=01 1 tuner # xx ; xx=02 2 tuners # xx ; xx=03 3 tuners N: { 01 } # Trace/Debug # xx yz ; xx=00 no konsole output # xx yz ; xx=01 konsole output # xx yz ; y=0 debug output (don't use) # xx yz ; y=1 no debug output # xx yz ; z=0 ouput to konsole # xx yz ; z=1 output to /var/tmp/debug.txt (not included yet!) # xx yz ; z=2 Output to UDP (to capture with gboxt) Z: { 01 12 } 192.168.1.11 8024 # Task type (not included yet) # 00 ** normal mode gbox mode (no season, use Multicam instead) # 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ # 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ # 11 ** Season Emulation in a Irdeto allcam chid 1702 Z # 12 ** Season Emulation in a Irdeto allcam chid 1722 Z # 13 ** Season Emulation in a Irdeto allcam chid 1762 Z # ** *1 Com port to use for season emulatiom (1 or 2) # ** 0* Use CTS f�r RST detection # ** 1* Use DCD f�r RST detection # ** ** 9600 = Baudrate to be used (working only on dbox2) #W: { 00 00 } 9600 # gbox working mode # 00 pure Emu # 01 pure SoftCam (when card inside), Emu (when no card inside) # 02 pure Net Client # 03 Mixed mode !!!!! always use this !!!!! G: { 03 } # Display ECM messages on Konsole # 00 don't show any ECM's # 01 show only valid ECM's # 02 show valid and bad ECM's with complete data display C: { 00 } # Display EMM messages on Konsole # *0 don't show any EMM's # *1 show only valid EMM's # *2 show valid and bad EMM's with complete data display # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log M: { 00 } # AutoUpdate # 00 is ignored (default) # 01 enable AU # 02 Auto AU !!!!! always use this !!!!! A: { 02 } # Key update # 01 update only new keys, default setting # 02 update all keys (used for valid PMK checking) #U: { 01 } # Hash pids # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF # 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!! H: { 01 } # Key files folder # 00 keyfiles in /var/keys # 01 keyfiles in /var/tmp T: { 00 } # On Screen Display for the Multysystemcam on com1/com2 # 00 No OSD (default) # 01 display Smartcard messages in Neutrino # 02 display Smartcard messages in Neutrino new nhttpd format # 03 display Smartcard messages in Enigma # mypass (use user=root and pass=mypass for nhttpd) O: { 01 } 192.168.1.51 # Logger and NET-mode UDP port Init (not included yet) # 00 do not init UDP port # 01 Init UDP port for IP, port, UDP #L: { 00 } 192.168.1.29 8017 # demux, multicam/comport configuration # *x ** ; x = device nummber to be used (0= default) # D* ** ; force use of /proc/bus/gtx for cw write operations (in the dbox2 the gbox writes directly the CW's, 00 is the recommended mode ! No drivers are required) use D* ** ONLY if you have Problems. 0* ** should be prefered !!! # F* ** ; write CW's in both devices (used for PVR in STB04xxx devices) # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx) # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx) # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx) # ** *z ; z=0001b (0x*1) use com1 as Multicam # ** *z ; z=0010b (0x*2) use com2 as Multicam # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams # ** *z ; z=0100b (0x*4) invert CTS detection on com1 # ** *z ; z=1000b (0x*8) invert CTS detection on com2 # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line) V: { 00 01 } # RS232 SSSP mode (not included yet) # x debug messages, 1=on, 0=off # y com port to use (0=none, 1=com1, 2=com2) #R: { 00 } # ============================================================================= # extra options to override default seting in case you expirience Problems, # normaly these setings are not required. # # cpu, api, cw write method (not included yet) # # 00 auto # 01 80X86 # 02 MPC823 # 03 IBM STB04xxx # 04 SuperH4 # 00 auto # 01 ibm # 02 api2 # 03 api3 # 00 cw write style = use internal routine (only dbox2) # 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr) # 02 cw write style = CA_SET_DESCR type2 # 03 cw write style = CA_SET_DESCR type3 # 04 cw write style = 16 byte /proc/bus/gtx # 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0 # xx write cw in 1st device with index=xx # yy write cw in 2nd device with index=yy # 01 means with .index=0 (default) # 02 means with .index=1 # 03 means with .index=0 and .index=1 # .. any bitwise combination ... # FF means with all 8 indexes (0-7) #J: { 01 00 00 01 01 } # Files, folders, devices # folder/device comment # #F: { 01 } /var/tmp/pmt.tmp // pmt file #F: { 02 } /var/tmp/emm.info // key update log file #F: { 03 } /var/tmp/ecm.info // ecm info file #F: { 04 } /var/tmp/atack.txt // atack info file #F: { 11 } /var/keys // folder for config files #F: { 12 } /var/tmp // folder for temporary file #F: { 13 } /var/tmp // folder for keyfiles #F: { 21 } /dev/dvb/adapter0/ca0 // ca device #F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device #F: { 23 } /dev/dvb/adapter0/demux0 // demux device #F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording) #F: { 41 } /dev/sci0 // STB04xxx slot1 #F: { 42 } /dev/sci1 // STB04xxx slot1 #F: { 43 } /dev/tts/0 // rs232 com1 #F: { 44 } /dev/tts/1 // rs232 com2 # For overclocking freaks, Clocking internal STB04xxx slots with: # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz # Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz # The Dream has not a clean clock signal, some cards that are sensitive will # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there. # On other STB04xxx recievers the same cards work with 6.30MHz # #F: { 51 } 02 // irdeto #F: { 52 } 03 // seca #F: { 53 } 03 // viaccess #F: { 54 } 03 // nagra #F: { 55 } 03 // crypto #F: { 57 } 03 // conax #F: { 58 } 03 // nds # force a name change of the season or sssp rs232 device #F: { 45 } /dev/ttyS1 # set stay alive ping time in seconds (default is 300) #F: { A0 } 300 # disable direct serial port I/O access on 80x86cpus (win and linux) # direct port i/o is used to set unusual Baudrates, if you want to # a 3.579MHz card in a 6.000MHz reader etc ... # # Enabled (A1=0) is the default setting, has always been !!! # # Disable (set to 1) it ONLY if you have problems with ioperm or you want # to use a usb-to-rs232 smartcard reader # #F: { A1 } 0