Index: ipk/source.sh4/swapemus_oscam_7965/var/swap/keys/oscam.server.oscam
===================================================================
--- ipk/source.sh4/swapemus_oscam_7965/var/swap/keys/oscam.server.oscam	(revision 19107)
+++ ipk/source.sh4/swapemus_oscam_7965/var/swap/keys/oscam.server.oscam	(revision 19108)
@@ -199,5 +199,5 @@
 label = Kabel BW   (Kartenschacht)
 protocol = internal
-device = /dev/sci1
+device = /dev/sci0
 caid = 098E
 detect = cd
@@ -208,5 +208,45 @@
 emmcache = 1,1,2
 
-
+[reader]
+enable = 0
+label = cyfraplus  (Kartenschacht)
+protocol = internal
+device = /dev/sci0
+caid = 0100
+group = 1
+emmcache = 1,1,2
+mhz = 357
+cardmhz = 357
+
+
+[reader]
+enable = 0
+label = tnk   (Kartenschacht)
+protocol = internal
+device  = /dev/sci0
+caid = 0b00
+group  = 1
+emmcache = 1,1,2
+
+####################    External Readers / SMARGO   ########################
+# Important !!!!      Use SMARGO Firmware 1.4 or 1.5                       #
+# With regard to your Smartcard set up the Reader/Smargo as follows:       #
+#                                                                          #
+# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra                       #
+# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0                        #
+#                                                                          #
+# For Irdeto, Betacrypt                                                    #
+# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0                          #
+#                                                                          #
+# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz-     #
+# Entries in the reader-Section                                            #
+#                                                                          #                                                                         #
+# For Nagra activate and complete the "rsakey = " and "boxkey = "  and     #
+# and remove the # in the smargopatch = 1 line                             #
+# example for HDplus is included                                           #
+#                                                                          #
+# for specific Smartcards such as TIGER or Viaccess with AES-Key           #
+# see the OSCAM documentation                                              #
+############################################################################
 
 [reader]
@@ -364,4 +404,24 @@
 
 [reader]
+enable = 0
+label = cyfraplus (externer Kartenleser)      
+protocol = mouse
+device = /dev/ttyUSB0
+caid = 0100       
+group = 1
+emmcache = 1,1,2
+detect = CD
+
+[reader]
+enable = 0
+label = tnk (externer Kartenleser)
+protocol = mouse
+device = /dev/ttyUSB0 
+caid = 0b00     
+group = 1
+emmcache = 1,1,2
+detect = CD
+
+[reader]
 enable=0
 label = KabelDeutschland (externer Kartenleser)