Index: ipk/source.sh4/emus_oscam_7819/var/etc/oscam_7209.emu
===================================================================
--- ipk/source.sh4/emus_oscam_7209/var/etc/oscam_7209.emu	(revision 18757)
+++ 	(revision )
@@ -1,4 +1,0 @@
-emuname  =Oscam_7209/unten-S02/oben-HD01plus
-binname  =oscam_7209
-startcam =/var/emu/oscam_7209 -c /var/keys &
-stopcam  =killall -9 oscam_7209
Index: ipk/source.sh4/emus_oscam_7819/var/etc/oscam_7819.emu
===================================================================
--- ipk/source.sh4/emus_oscam_7819/var/etc/oscam_7819.emu	(revision 18796)
+++ ipk/source.sh4/emus_oscam_7819/var/etc/oscam_7819.emu	(revision 18796)
@@ -0,0 +1,4 @@
+emuname  =Oscam 7819
+binname  =oscam_7819
+startcam =/var/emu/oscam_7819 -c /var/keys &
+stopcam  =killall -9 oscam_7819
Index: ipk/source.sh4/emus_oscam_7819/var/keys/oscam.server.oscam
===================================================================
--- ipk/source.sh4/emus_oscam_7209/var/keys/oscam.server.oscam	(revision 18757)
+++ ipk/source.sh4/emus_oscam_7819/var/keys/oscam.server.oscam	(revision 18796)
@@ -7,22 +7,9 @@
 ############################################################################
 
-
-######################### Internal Readers   ###############################
-# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS  #
-#                                                                          #
-# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#"    #
-#                                                                          #
-# For Nagra activate and set the correct "rsakey = " and "boxkey = " en    #
-# examples for HDplus HD02 and Sky S02 are included                                           #
-#                                                                          #
-# for specific Smartcards such as TIGER or Viaccess with AES-Key           #
-# see the OSCAM documentation                                              #
-############################################################################
-
-[reader]
-enable = 0
-Label = HD plus HD02
+[reader]
+enable = 0
+Label = HD+ (Kartenschacht) (schwarze Karte)
 Protocol = internal
-device = /dev/sci1
+device = /dev/sci0
 emmcache = 1,1,2
 detect = CD
@@ -34,11 +21,9 @@
 boxkey = A7642F57BC96D37C
 
-
-
-[reader]
-enable = 1
-Label = HD plus HD01
+[reader]
+enable = 0
+Label = HD+ (Kartenschacht) (weisse Karte)
 Protocol = internal
-device = /dev/sci1
+device = /dev/sci0
 emmcache = 1,1,2
 detect = CD
@@ -51,6 +36,6 @@
 
 [reader]
-enable = 1
-label    = Sky S02
+enable = 0
+label    = SKY-DE S02 (Kartenschacht)
 protocol = internal
 device   = /dev/sci0
@@ -64,5 +49,5 @@
 [reader]
 enable = 0
-label =  skydeV13
+label =  SKY-DE V13 (Kartenschacht)
 protocol = internal
 device = /dev/sci0
@@ -78,8 +63,7 @@
 ndsversion = 2
 
-
-[reader]
-enable=0
-Label = MTV
+[reader]
+enable=0
+Label = MTV (Kartenschacht)
 protocol = internal
 detect = CD
@@ -92,8 +76,7 @@
 cardmhz  = 368
 
-
-[reader]
-enable=0
-Label = FreeXTV
+[reader]
+enable=0
+Label = FreeXTV (Kartenschacht)
 protocol = internal
 device = /dev/sci0
@@ -103,11 +86,10 @@
 services = srg
 caid = 0500
-mhz                           = 357
-cardmhz                       = 368
-
-
-[reader]
-enable=0
-Label = KabelDeutschland
+mhz = 357
+cardmhz = 368
+
+[reader]
+enable=0
+Label = KabelDeutschland (Kartenschacht)
 Protocol = internal
 Device = /dev/sci0
@@ -122,5 +104,5 @@
 [reader]
 enable=0
-label = SRG
+label = SRG (Kartenschacht)
 protocol = internal
 device = /dev/sci0
@@ -133,7 +115,7 @@
 deprecated = 1
 
- [reader]
-enable=0
-Label = ORF
+[reader]
+enable=0
+Label = ORF (Kartenschacht)
 protocol = internal
 device = /dev/sci0
@@ -146,30 +128,7 @@
 cardmhz                       = 368
 
-
-
-####################    External Readers / SMARGO   ########################
-# Important !!!!      Use SMARGO Firmware 1.4 or 1.5                       #
-# With regard to your Smartcard set up the Reader/Smargo as follows:       #
-#                                                                          #
-# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra                       #
-# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0                        #
-#                                                                          #
-# For Irdeto, Betacrypt                                                    #
-# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0                          #
-#                                                                          #
-# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz-     #
-# Entries in the reader-Section                                            #
-#                                                                          #                                                                         #
-# For Nagra activate and complete the "rsakey = " and "boxkey = "  and     #
-# and remove the # in the smargopatch = 1 line                             #
-# example for HDplus is included                                           #
-#                                                                          #
-# for specific Smartcards such as TIGER or Viaccess with AES-Key           #
-# see the OSCAM documentation                                              #
-############################################################################
-
-[reader]
-enable = 0
-label = Extern_HD plus HD01
+[reader]
+enable = 0
+label = HD+ (externer Kartenleser) (weisse Karte)
 protocol = mouse
 device = /dev/ttyUSB0
@@ -185,5 +144,5 @@
 [reader]
 enable = 0
-label = Extern_HD plus HD02
+label = HD+ (externer Kartenleser) (schwarze Karte)
 protocol = mouse
 device = /dev/ttyUSB0
@@ -200,7 +159,7 @@
 [reader]
 enable = 0
-label = Extern_Sky S02
-protocol = mouse
-device = /dev/ttyUSB1
+label = SKY-DE S02 (externer Kartenleser)
+protocol = mouse
+device = /dev/ttyUSB0
 emmcache = 1,1,2
 detect = CD
@@ -212,7 +171,7 @@
 [reader]
 enable = 0
-label = Extern_skydeV13
-protocol = mouse
-device = /dev/ttyUSB1
+label = SKY-DE V13 (externer Kartenleser)
+protocol = mouse
+device = /dev/ttyUSB0
 caid = 09C4
 boxid = 12345678
@@ -228,5 +187,5 @@
 [reader]
 enable=0
-label = Extern_ORF
+label = ORF (externer Kartenleser)
 protocol = mouse
 device = /dev/ttyUSB0
@@ -241,7 +200,7 @@
 [reader]
 enable=0
-label = Extern_KabelD
-protocol = mouse
-device = /dev/ttyUSB1
+label = KabelDeutschland (externer Kartenleser)
+protocol = mouse
+device = /dev/ttyUSB0
 emmcache = 1,1,2
 detect = CD
@@ -254,5 +213,5 @@
 [reader]
 enable=0
-label = Extern_SRG
+label = SRG (externer Kartenleser)
 protocol = mouse
 device = /dev/ttyUSB0
@@ -268,5 +227,5 @@
 [reader]
 enable=0
-Label = Extern_FreeXTV
+Label = FreeXTV (externer Kartenleser)
 protocol = mouse
 device = /dev/ttyUSB0
@@ -281,5 +240,5 @@
 [reader]
 enable=0
-Label = Extern_MTV
+Label = MTV (externer Kartenleser)
 protocol = mouse
 device = /dev/ttyUSB0
@@ -300,7 +259,8 @@
 # For further details see the OSCAM documentation                          #
 ############################################################################
-[reader]
-enable = 0
-label        = cccam-reader
+
+[reader]
+enable = 0
+label        = cccam (Cardsharing)
 protocol     = cccam
 device       = IP/dyndns,PORT
@@ -314,5 +274,5 @@
 [reader]
 enable = 0
-label    = camd35-reader
+label    = camd35 (Cardsharing)
 protocol = camd35
 device   = IP/dyndns,PORT
@@ -324,5 +284,5 @@
 [reader]
 enable = 0
-label    = newcamd-reader
+label    = newcamd (Cardsharing)
 protocol = newcamd
 key     = 0102030405060708091011121314