Index: k/source.sh4/swapemus_gbox_800/var/swap/keys/gbox_cfg =================================================================== --- /ipk/source.sh4/swapemus_gbox_800/var/swap/keys/gbox_cfg (revision 14531) +++ (revision ) @@ -1,199 +1,0 @@ -# gbox config file - -# Trace, Debug -# xx yz ; xx=00 no konsole output -# xx yz ; xx=01 konsole output -# xx yz ; y=0 debug output (dont use) -# xx yz ; y=1 no debug output -# xx yz ; z=0 ouput to konsole -# xx yz ; z=1 output to /var/tmp/debug.txt -# xx yz ; z=2 Output to UDP (to capture with gboxt) -Z: { 01 10 } 127.0.0.1 8024 - -# gbox working mode -# 00 pure Emu -# 01 pure SoftCam (when card inside), Emu (when no card inside) -# 02 pure Net Client -# 03 Mixed mode !!!!! always use this !!!!! -G: { 01 } - -# Display ECM messages on Konsole -# 00 dont show any ECMs -# 01 show only valid ECMs -# 02 show valid and bad ECMs with complete data display -# 1X show ca access -# 2X use nagra aladin 1801 in betacrypt mode (for UM-I02) -C: { 01 } - -# Display EMM messages on Konsole -# 00 dont show any EMMs -# 01 show only valid EMMs -# 02 show valid and bad EMMs with complete data display -# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log -M: { 01 } - -# Auto Update -# 00 is ignored (default) -# 01 enable AU -# 02 Auto AU !!!!! always use this !!!!! -A: { 01 } - -# Key Update -# 01 update only new keys, default setting -# 02 update all keys (used for valid PMK checking) -U: { 01 } - -# Hash pids -# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF -# 01 hash only pids with implemented algos and available keys !!!!! always use this -H: { 01 } - -# Key files folder -# 00 keyfiles in /var/keys -# 01 keyfiles in /media/autofs/sda4/swapextensions/keys -T: { 00 } - -# On Screen Display for the Multysystemcam on com1/com2 -# 00 No OSD (default) -# 01 display Smartcard messages in Neutrino -# 02 display Smartcard messages in Neutrino new nhttpd format -# 03 display Smartcard messages in Enigma -# 04 display Smartcard messages in Enigma2 -O: { 00 } 192.168.0.27 - -# Logger and NET-mode UDP port Init -# 00 do not init UDP port -# 01 Init UDP port for IP, port, UDP -#L: { 00 } 127.0.0.1 7025 - -# demux, multicam/comport configuration -# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line) -# *x ** ; x = device nummber to be used (0= default) -# D* ** ; force use of /proc/bus/gtx for cw write operations - (in the dbox2 the gbox writes directly the CWs, 00 is the - recommended mode ! No drivers are required) use D* ** ONLY if - you have Problems. 0* ** should be prefered !!! -# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices) -# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx) -# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx) -# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx) -# ** *z ; z=0001b (0x*1) use com1 as Multicam -# ** *z ; z=0010b (0x*2) use com2 as Multicam -# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams -# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams -# ** *z ; z=0100b (0x*4) invert CTS detection on com1 -# ** *z ; z=1000b (0x*8) invert CTS detection on com2 -#V: { 00 05 } // smargo -V: { 00 30 } // sci0 und sci1 -#V: { 00 35 } // sci0 und sci1 und smargo - - -# RS232 SSSP mode -# x debug messages, 1=on, 0=off -# y com port to use (0=none, 1=com1, 2=com2) -R: { 00 } - -# Task type -# 00 ** normal mode gbox mode (no season, use Multicam instead) -# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ -# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ -# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z -# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z -# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z -# ** *1 Com port to use for season emulatiom (1 or 2) -# ** 0* Use CTS for RST detection -# ** 1* Use DCD for RST detection -# ** ** 9600 = Baudrate to be used (working only on dbox2) -W: { 00 00 } 9600 - -# ============================================================================= -# extra options to override default seting in case you expirience Problems, -# normaly these setings are not required. - -# GboxTwin mode -# this options for the 2nd gbox ONLY -# you must have an extra gbox, gbox_cfg and cwshare.cfg running on /tmp, -# all other files can linked to the org. files -#F: { A6 } 5 - -# cpu, api, cw write method -# 00 auto -# 01 80X86 -# 02 MPC823 -# 03 IBM STB04xxx -# 00 auto -# 01 ibm -# 02 api2 -# 03 api3 -# 00 cw write style = use internal routine (only dbox2) -# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr) -# 02 cw write style = CA_SET_DESCR type2 -# 03 cw write style = CA_SET_DESCR type3 -# 04 cw write style = 16 byte /proc/bus/gtx -# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0 -# xx write cw in 1st device with index=xx -# yy write cw in 2nd device with index=yy -# 01 means with .index=0 (default) -# 02 means with .index=1 -# 03 means with .index=0 and .index=1 -# .. any bitwise combination ... -# FF means with all 8 indexes (0-7) -#J: { 00 03 01 00 00 } - -# Files, folders, devices -# folder/device comment -F: { 01 } /var/tmp/pmt.gbx // pmt file -F: { 02 } /var/tmp/emm.info // key update log file -F: { 03 } /var/tmp/ecm.info // ecm info file -F: { 04 } /var/tmp/atack.txt // atack info file -F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode) -F: { 11 } /var/keys // folder for config files -F: { 12 } /var/tmp // folder for temporary file -F: { 13 } /var/keys // folder for keyfiles -#F: { 21 } /dev/null // ca device -#F: { 22 } /dev/null // dvr device -#F: { 23 } /dev/null // demux device -#F: { 31 } /dev/null // second ca device to write cw's (recording) -#F: { 41 } /dev/sci0 // STB04xxx slot1 -#F: { 42 } /dev/sci1 // STB04xxx slot1 -F: { 43 } /dev/ttyUSB0 // rs232 com1 -#F: { 44 } /dev/ttyUSB1 // rs232 com2 - -# For overclocking freaks, Clocking internal STB04xxx slots with: -# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz -# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz -# The Dream has not a clean clock signal, some cards that are sensitive will -# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there. -# On other STB04xxx recievers the same cards work with 6.30MHz -#F: { 51 } 02 // irdeto -#F: { 52 } 03 // seca -#F: { 53 } 03 // viaccess -#F: { 54 } 02 // nagra -#F: { 55 } 03 // crypto -#F: { 57 } 03 // conax -#F: { 58 } 03 // nds - -# force a name change of the season or sssp rs232 device -#F: { 45 } /dev/ttyS1 - -# set stay alive ping time in seconds (default is 300) -F: { A0 } 300 - -# disable direct serial port I/O access on 80x86cpus (win and linux) -# direct port i/o is used to set unusual Baudrates, if you want to -# a 3.579MHz card in a 6.000MHz reader etc ... -# -# Enabled (A1=0) is the default setting, has always been !!! -# -# Disable (set to 1) it ONLY if you have problems with ioperm or you want -# to use a usb-to-rs232 smartcard reader -F: { A1 } 1 - -############### Erweiterungen ######## - -# Trace Card Access -# 0 - off -# 1 - on -# 2 - Detailed -# 3 - Full -F: { CA } 0