//mbox.cfg EXPLANATION and EXAMPLES

D: { 4 }

//D: { x }
//x=0 -> disable 
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//default disabled

B: { 0 }

//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable 
//default disabled


Z: { 13 } { 192.168.0.100 }   

//  Z option -> control sending/writing current informations
//  Z: { xy } { IP port } 
//   x=0 -> don't print time stamp (in console screen and in debug file)
//   x=1 -> print time stamp ( .... )
//   y=0 -> no writing/sending informations to debug file/destination IP
//   y=1 -> send informations to destination IP but not in debug file
//   y=2 -> write informations to debug file but don't send to destination IP
//   y=3 -> write/send informations to debug file/destination IP
//   IP port -> destination IP and UDP port where to send informations
//  no default



//C: { 192.168.0.1 }

// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default


U: { 1 }

// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled



L: { 1 }

// L option -> how mbox to menage virtual card(s) with level 0 
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1


#G: { /hdd/ }

//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!


T: { /tmp/ }

// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }



K: { /var/keys/ }

// K option -> where is cwshare.cfg file
// K: { folder_path_to_files, example: K: { /var/keys/ } }


E: { 1 }

// E option -> disable same cards from peers
// E: { x }
// x=0 -> use same cards(boxids) from peers
// x=1 -> don't use same cards(boxids) from peers
// default 1

M: { 1 }

// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0

P: { 2/tmp/camd.socket }

// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2

W: { 0 }

// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled

H: { 0 }

//H option -> C line priority over network cards
// H: { x }
// x=0 -> disabled -> newtwork cards and local cards has same priority
// x=1 -> enabled -> your local cards has priority, no network cards used
// default disabled 


Q: { 300 }

//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.


F: { 500 }

//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB