| 1 | # kbox config file
|
|---|
| 2 |
|
|---|
| 3 | # Number Of Tuners
|
|---|
| 4 | # xx ; xx=00 1 tuner (default)
|
|---|
| 5 | # xx ; xx=01 1 tuner
|
|---|
| 6 | # xx ; xx=02 2 tuners
|
|---|
| 7 | # xx ; xx=03 3 tuners
|
|---|
| 8 | N: { 01 }
|
|---|
| 9 |
|
|---|
| 10 |
|
|---|
| 11 | # Trace/Debug
|
|---|
| 12 | # xx yz ; xx=00 no konsole output
|
|---|
| 13 | # xx yz ; xx=01 konsole output
|
|---|
| 14 | # xx yz ; y=0 debug output (don't use)
|
|---|
| 15 | # xx yz ; y=1 no debug output
|
|---|
| 16 | # xx yz ; z=0 ouput to konsole
|
|---|
| 17 | # xx yz ; z=1 output to /var/tmp/debug.txt (not included yet!)
|
|---|
| 18 | # xx yz ; z=2 Output to UDP (to capture with gboxt)
|
|---|
| 19 | Z: { 01 12 } 192.168.1.11 8024
|
|---|
| 20 |
|
|---|
| 21 | # Task type (not included yet)
|
|---|
| 22 | # 00 ** normal mode gbox mode (no season, use Multicam instead)
|
|---|
| 23 | # 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
|
|---|
| 24 | # 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
|
|---|
| 25 | # 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
|
|---|
| 26 | # 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
|
|---|
| 27 | # 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
|
|---|
| 28 | # ** *1 Com port to use for season emulatiom (1 or 2)
|
|---|
| 29 | # ** 0* Use CTS f�r RST detection
|
|---|
| 30 | # ** 1* Use DCD f�r RST detection
|
|---|
| 31 | # ** ** 9600 = Baudrate to be used (working only on dbox2)
|
|---|
| 32 | #W: { 00 00 } 9600
|
|---|
| 33 |
|
|---|
| 34 | # gbox working mode
|
|---|
| 35 | # 00 pure Emu
|
|---|
| 36 | # 01 pure SoftCam (when card inside), Emu (when no card inside)
|
|---|
| 37 | # 02 pure Net Client
|
|---|
| 38 | # 03 Mixed mode !!!!! always use this !!!!!
|
|---|
| 39 | G: { 03 }
|
|---|
| 40 |
|
|---|
| 41 | # Display ECM messages on Konsole
|
|---|
| 42 | # 00 don't show any ECM's
|
|---|
| 43 | # 01 show only valid ECM's
|
|---|
| 44 | # 02 show valid and bad ECM's with complete data display
|
|---|
| 45 | C: { 00 }
|
|---|
| 46 |
|
|---|
| 47 | # Display EMM messages on Konsole
|
|---|
| 48 | # *0 don't show any EMM's
|
|---|
| 49 | # *1 show only valid EMM's
|
|---|
| 50 | # *2 show valid and bad EMM's with complete data display
|
|---|
| 51 | # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
|
|---|
| 52 | M: { 00 }
|
|---|
| 53 |
|
|---|
| 54 | # AutoUpdate
|
|---|
| 55 | # 00 is ignored (default)
|
|---|
| 56 | # 01 enable AU
|
|---|
| 57 | # 02 Auto AU !!!!! always use this !!!!!
|
|---|
| 58 | A: { 02 }
|
|---|
| 59 |
|
|---|
| 60 | # Key update
|
|---|
| 61 | # 01 update only new keys, default setting
|
|---|
| 62 | # 02 update all keys (used for valid PMK checking)
|
|---|
| 63 | #U: { 01 }
|
|---|
| 64 |
|
|---|
| 65 | # Hash pids
|
|---|
| 66 | # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
|
|---|
| 67 | # 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
|
|---|
| 68 | H: { 01 }
|
|---|
| 69 |
|
|---|
| 70 | # Key files folder
|
|---|
| 71 | # 00 keyfiles in /var/keys
|
|---|
| 72 | # 01 keyfiles in /var/tmp
|
|---|
| 73 | T: { 00 }
|
|---|
| 74 |
|
|---|
| 75 | # On Screen Display for the Multysystemcam on com1/com2
|
|---|
| 76 | # 00 No OSD (default)
|
|---|
| 77 | # 01 display Smartcard messages in Neutrino
|
|---|
| 78 | # 02 display Smartcard messages in Neutrino new nhttpd format
|
|---|
| 79 | # 03 display Smartcard messages in Enigma
|
|---|
| 80 | # mypass (use user=root and pass=mypass for nhttpd)
|
|---|
| 81 | O: { 01 } 192.168.1.51
|
|---|
| 82 |
|
|---|
| 83 | # Logger and NET-mode UDP port Init (not included yet)
|
|---|
| 84 | # 00 do not init UDP port
|
|---|
| 85 | # 01 Init UDP port for IP, port, UDP
|
|---|
| 86 | #L: { 00 } 192.168.1.29 8017
|
|---|
| 87 |
|
|---|
| 88 | # demux, multicam/comport configuration
|
|---|
| 89 | # *x ** ; x = device nummber to be used (0= default)
|
|---|
| 90 | # D* ** ; force use of /proc/bus/gtx for cw write operations
|
|---|
| 91 | (in the dbox2 the gbox writes directly the CW's, 00 is the
|
|---|
| 92 | recommended mode ! No drivers are required) use D* ** ONLY if
|
|---|
| 93 | you have Problems. 0* ** should be prefered !!!
|
|---|
| 94 | # F* ** ; write CW's in both devices (used for PVR in STB04xxx devices)
|
|---|
| 95 | # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
|
|---|
| 96 | # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
|
|---|
| 97 | # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
|
|---|
| 98 | # ** *z ; z=0001b (0x*1) use com1 as Multicam
|
|---|
| 99 | # ** *z ; z=0010b (0x*2) use com2 as Multicam
|
|---|
| 100 | # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
|
|---|
| 101 | # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
|
|---|
| 102 | # ** *z ; z=0100b (0x*4) invert CTS detection on com1
|
|---|
| 103 | # ** *z ; z=1000b (0x*8) invert CTS detection on com2
|
|---|
| 104 | # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
|
|---|
| 105 | V: { 00 01 }
|
|---|
| 106 |
|
|---|
| 107 | # RS232 SSSP mode (not included yet)
|
|---|
| 108 | # x debug messages, 1=on, 0=off
|
|---|
| 109 | # y com port to use (0=none, 1=com1, 2=com2)
|
|---|
| 110 | #R: { 00 }
|
|---|
| 111 |
|
|---|
| 112 | # =============================================================================
|
|---|
| 113 | # extra options to override default seting in case you expirience Problems,
|
|---|
| 114 | # normaly these setings are not required.
|
|---|
| 115 | #
|
|---|
| 116 | # cpu, api, cw write method (not included yet)
|
|---|
| 117 | #
|
|---|
| 118 | # 00 auto
|
|---|
| 119 | # 01 80X86
|
|---|
| 120 | # 02 MPC823
|
|---|
| 121 | # 03 IBM STB04xxx
|
|---|
| 122 | # 04 SuperH4
|
|---|
| 123 | # 00 auto
|
|---|
| 124 | # 01 ibm
|
|---|
| 125 | # 02 api2
|
|---|
| 126 | # 03 api3
|
|---|
| 127 | # 00 cw write style = use internal routine (only dbox2)
|
|---|
| 128 | # 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
|
|---|
| 129 | # 02 cw write style = CA_SET_DESCR type2
|
|---|
| 130 | # 03 cw write style = CA_SET_DESCR type3
|
|---|
| 131 | # 04 cw write style = 16 byte /proc/bus/gtx
|
|---|
| 132 | # 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
|
|---|
| 133 | # xx write cw in 1st device with index=xx
|
|---|
| 134 | # yy write cw in 2nd device with index=yy
|
|---|
| 135 | # 01 means with .index=0 (default)
|
|---|
| 136 | # 02 means with .index=1
|
|---|
| 137 | # 03 means with .index=0 and .index=1
|
|---|
| 138 | # .. any bitwise combination ...
|
|---|
| 139 | # FF means with all 8 indexes (0-7)
|
|---|
| 140 | #J: { 01 00 00 01 01 }
|
|---|
| 141 |
|
|---|
| 142 | # Files, folders, devices
|
|---|
| 143 | # folder/device comment
|
|---|
| 144 | #
|
|---|
| 145 | #F: { 01 } /var/tmp/pmt.tmp // pmt file
|
|---|
| 146 | #F: { 02 } /var/tmp/emm.info // key update log file
|
|---|
| 147 | #F: { 03 } /var/tmp/ecm.info // ecm info file
|
|---|
| 148 | #F: { 04 } /var/tmp/atack.txt // atack info file
|
|---|
| 149 | #F: { 11 } /var/keys // folder for config files
|
|---|
| 150 | #F: { 12 } /var/tmp // folder for temporary file
|
|---|
| 151 | #F: { 13 } /var/tmp // folder for keyfiles
|
|---|
| 152 | #F: { 21 } /dev/dvb/adapter0/ca0 // ca device
|
|---|
| 153 | #F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
|
|---|
| 154 | #F: { 23 } /dev/dvb/adapter0/demux0 // demux device
|
|---|
| 155 | #F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
|
|---|
| 156 | #F: { 41 } /dev/sci0 // STB04xxx slot1
|
|---|
| 157 | #F: { 42 } /dev/sci1 // STB04xxx slot1
|
|---|
| 158 | #F: { 43 } /dev/tts/0 // rs232 com1
|
|---|
| 159 | #F: { 44 } /dev/tts/1 // rs232 com2
|
|---|
| 160 |
|
|---|
| 161 | # For overclocking freaks, Clocking internal STB04xxx slots with:
|
|---|
| 162 | # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
|
|---|
| 163 | # Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
|
|---|
| 164 | # The Dream has not a clean clock signal, some cards that are sensitive will
|
|---|
| 165 | # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
|
|---|
| 166 | # On other STB04xxx recievers the same cards work with 6.30MHz
|
|---|
| 167 | #
|
|---|
| 168 | #F: { 51 } 02 // irdeto
|
|---|
| 169 | #F: { 52 } 03 // seca
|
|---|
| 170 | #F: { 53 } 03 // viaccess
|
|---|
| 171 | #F: { 54 } 03 // nagra
|
|---|
| 172 | #F: { 55 } 03 // crypto
|
|---|
| 173 | #F: { 57 } 03 // conax
|
|---|
| 174 | #F: { 58 } 03 // nds
|
|---|
| 175 |
|
|---|
| 176 | # force a name change of the season or sssp rs232 device
|
|---|
| 177 | #F: { 45 } /dev/ttyS1
|
|---|
| 178 |
|
|---|
| 179 | # set stay alive ping time in seconds (default is 300)
|
|---|
| 180 | #F: { A0 } 300
|
|---|
| 181 |
|
|---|
| 182 |
|
|---|
| 183 | # disable direct serial port I/O access on 80x86cpus (win and linux)
|
|---|
| 184 | # direct port i/o is used to set unusual Baudrates, if you want to
|
|---|
| 185 | # a 3.579MHz card in a 6.000MHz reader etc ...
|
|---|
| 186 | #
|
|---|
| 187 | # Enabled (A1=0) is the default setting, has always been !!!
|
|---|
| 188 | #
|
|---|
| 189 | # Disable (set to 1) it ONLY if you have problems with ioperm or you want
|
|---|
| 190 | # to use a usb-to-rs232 smartcard reader
|
|---|
| 191 | #
|
|---|
| 192 | #F: { A1 } 0
|
|---|
![(please configure the [header_logo] section in trac.ini)](/openaaf/chrome/common/titannit_trac_banner.png)
